Remax
Refine Search
Air / Pneumatic Tool
Abrasives
Automotive Tools
Outdoor & Gardens
- Lawn & Gardens
Hand Tools
- Hand Tools/Chisel,Crowbar,Pins
- hand tools/Hammer & Pliers
- hand tools/Knives & Multi Tools
- hand tools/Measuring & Levelling
- hand tools/Pipe Bender /Pipe Flaring Tools
- hand tools/Plumbing & Flooring
- hand tools/Screw & Nut Driver
- hand tools/Spanners & Wrenchs
- Hand Tools/T-Bar Clamp & F Clamp
- hand tools/Tools Kits
- Hand Tools/Woodworking Tools
Lubrications/Chemical Product
Power Tools
Safety & Security
- Drop-forged, heat treated steel body
- For automotive and industrial use
- Fits in brake caliper to push back pistons for new brake pads installation
- Essential tool for retracting the brake piston to allow insertion of new brake pads
RM138.00
- Drop-forged, heat treated steel jaw
- Hardened and tempered, precision machined center bolt
- Sliding T – bar handle applies even force
- Black oxide finished for durability
- 3 jaw design for greater leverage and easy pulling
- Removes all sleeve type bearing with 1/2” – 2” inside diameter
RM70.00
- Heat treatment and drop forged
- For removal replacement of oil drain plugs
RM68.00
- Complete set of adapters for wide range of vehicle application
- Provide both left-handed and right-handed thrust bolt assemblies
- Prevents damaging pistons and seals
- Design for pushing back and wind back brake pistons
RM204.00
- Quick release & best suited for limited access areas
- Uniform load distribution and self-centered
- Through reversing the arms internal & external application are possible
- Supplied with different leg variants and hydraulic thrust spindle
- Extremely robust spindle with inductively hardened thread
- To draw out pullers, bush and bearings
RM555.00
- Nylon fiber body
- Working pressure : 75-120PSI/ 5.0-8.0KGS
- Max pressure : 220PSI/ 15KGS
- Application:
- To blast debris and dirty out of confined spaces
RM96.00
- Hardened-steel punch forces pin all the way out
- Design for motorcycle and bicycle
- Easy operate
- Ideal for disassembling rivet type roller chain
- To repair your motorcycle/bicycle chains with strength & ease
RM72.00
- Aluminum alloy steel body
- Highest use pressure is 1.0 MPA
- Nozzle extension provided
RM45.00
- 3 TON FLOOR JACK
- Operates in vertical or horizontal positions
- Screw top extends and precisely adjusts lifting height
- 2pcs pump handle for use in tight spaces and compact storage
- Hardened, machined and polished ram and plunger for smooth operation
- For safely lift up your automobile when need to work underneath
RM408.00
- 38-GH500 5/8"x50M PVC GARDEN HOSE
- High-flexibility, light-weight and easy to handle
- No fissure phenomenon by ultraviolet rays and direct ray of the sun
- Durable, anti-cold proof, non-inflated
- Temperatures: -5C to +65c
- 5/8"/15MM X 50 METERS
RM170.00
38-PH442 5/16"X10M HIGH PRESSURE AIR HOSE With Brass Fitting
RM33.00
- 38-PH443 5/16"X20M HIGH PRESSURE AIR HOSE With Brass Fitting
- Absorb the advance technology from japan, green environment material with high density of polyester yarn
- Highly flexible and durability against climate, abrasion and chemical
- High pressure (250 Bar)
- Used to concentrate water at one point or spread it over a large area
RM58.00
- 38-PH444 5/16"X30M HIGH PRESSURE AIR HOSE With Brass Fitting
- Absorb the advance technology from japan, green environment material with high density of polyester yarn
- Highly flexible and durability against climate, abrasion and chemical
- High pressure (250 Bar)
- Used to concentrate water at one point or spread it over a large area
RM82.00
- 38-PH446 5/16"X100M HIGH PRESSURE AIR HOSE With Brass Fitting
- Absorb the advance technology from japan, green environment material with high density of polyester yarn
- Highly flexible and durability against climate, abrasion & chemical
- High pressure resistance (50 Bar, 5 layers)
- Used to concentrate water at one point or spread it over a large are
RM260.00
- Takes roller chain apart easily without hammers and punches
- Heats-treated tip, screw and nut
- Replacement screw and nut, tip and handle available
- Ideal for disassembling rivet type roller chain
- To repair your motorcycle/bicycle chains with strength & ease
RM61.00
- Curved outlet pipe & coupler with ball check & hardened jaws
- Heavy-duty construction for professional operation & home users
- To apply lubricant through an aperture to a specific point
- Ideal for machines, automobiles, farm and garden equipment recreation vehicles and etc
RM40.00
- 500CC OIL CAN
- High quality metal bodied oil can with metal pump unit
- Flexible braided interchangeable spout
- Smooth pumping action ensure proper oil pumping
- Ideal for accurate delivered of lubricating oil & similar fluid
RM12.00
- Suitable also for low viscosity fluids such as water
- This innovative design enable manual and pneumatic oil extracting, automatically alternated
- Pressure relief valve allows handle to return to carrying position for ease of transportation
- Pouring spout allows for clean transfer at a proper disposal facility making recycling easy
- Expert Quality, ideal for one person operation, easily operated by using either hand pump action or compressed air supply
- For the extraction of all type of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery
RM416.00
- CHAIN OIL FILTER WRENCH
- Aluminum Handle
- For all type oil filters, radiator caps and hub caps use
- Can be used in both direction without being removed
- Fully adjustable universal chain design fit any diameter oil filter
- Suitable for use in hardened pipes and oil filter
RM13.00
- 900mm insulated cable and earth clip
- Insulated piercing contact point with protective screw cap
- For testing the car light
RM14.00
- 100CC MINI GREASE GUN
- Perfect for use in confined spaces
- Pistol grip design for one hand operation
- Dual port head cap can be used as a pistol or lever style gun
- Includes push lock plunger, die cast T-handle that locks in place for loading
- To apply lubricant through an aperture to a specific point
RM36.00
- GREASE GUN PISTOL TYPE
- Zinc plated head
- To apply lubricant through an aperture to a specific point
RM48.00
- Metal, adjustable body
- Pocket clip for easy carry
RM14.00
- 2 TON FLOOR JACK
- Built in safety valve provides overload protection
- Heavy duty steel construction provides long term durability
- Bypass device protects against over-pumping for safer operation
- For safely lift up your automobile when need to work underneath
RM170.00
- 1.5 TON SCISSORS JACK
- Heavy duty steel construction
- Smooth operation with faster up & down operation
- Include with one handle
- For safely lift up your automobile when need to work underneath
RM52.00
- CHAIN OIL FILTER WRENCH
- For all type oil filters, radiator caps and hub caps use
- Can be used in both direction without being removed
- Fully adjustable universal chain design fit any diameter oil filter
- Suitable for use in hardened pipes and oil filter
RM24.00
- 95-AG306 9"AIR CHUCK
- Zinc alloy head and Uni-chromed finish
- Steel tube covered red rubber grip
- Ideal for inflating tires on trucks, campers, cars and more
RM29.00
- 95-AG309 15" TIRE GAUGE
- Working pressure : 160 Ib/in²
- Tough break-resistant A.B.S plastic head
- A long body and dual head allow the tire gauge to reach inside or outside
- Designed to measure air pressure on tires
RM65.00
- 95-AG320 6" DELUXE STEEL BAR TIRE GAUGE
- Tough break-resistant A.B.S plastic head
- Spring pocket clip
- Designed to measure air pressure on tires
RM8.50
- AIR CHUCK W/ SINGLE FEMALE UNION BARB (H)
- Brass body and nickel plated
- With 5/16” connector
- Ideal for inflating tires on trucks, campers, cars and more
RM19.00
- 95-AG346P AIR CHUCK WITH QUICK COUPLER (P)
- Brass body and nickel plated
- With 5/16” connector
- Ideal for inflating tires on trucks, campers, cars and more
RM22.00
- 95-AG360 14" AIR CHUCK
- Zinc alloy head and Uni-chromed finish
- Steel tube covered red rubber grip
- Ideal for inflating tires on trucks, campers, cars and more
RM36.00
CAPACITY (ℓ) |
W (MM) |
H (MM) |
L (MM) |
|
|
95- HS430 |
3.0 |
170 |
375 |
|
|
95- HS450 |
5.0 |
195 |
425 |
|
|
95- HS480 |
8.0 |
210 |
515 |
|
|
RM55.00
RM65.00
CAPACITY (ℓ) |
W (MM) |
H (MM) |
L (MM) |
|
|
95- HS430 |
3.0 |
170 |
375 |
|
|
95- HS450 |
5.0 |
195 |
425 |
|
|
95- HS480 |
8.0 |
210 |
515 |
|
|
RM48.00
RM55.00
CAPACITY (ℓ) |
W (MM) |
H (MM) |
L (MM) |
|
|
95- HS430 |
3.0 |
170 |
375 |
|
|
95- HS450 |
5.0 |
195 |
425 |
|
|
95- HS480 |
8.0 |
210 |
515 |
|
|
RM85.00
- Provides good snag, cut and abrasion resistance
- Slip resistance
- Soft and endurable
RM9.00
- Drop-forged, heat treated steel
- For automotive and industrial usage
- Cast steel bearing splitter and yoke
- Pull out the bear with the H- type beam and bolt
- Design for safely remove bearing, gears, pulleys, and steering wheels
RM320.00
- BELT TYPE OIL FILTER WRENCH
- Designed with adjustable belt type
- Suitable for all type oil filters,radiator caps and hub caps use
- Satin finished, drop-forged steel body with hanging hole
- Used to remove oil filter from trucks and cars
RM21.00
- Hardened-steel and easy operate
- Handle can be folded away for easy storage
- Ideal for disassembling rivet type roller chain
- To repair your motorcycle/bicycle chains with strength & ease
- This chain breaker is ideal and essential tool for use on 420, 428, 520 & 530 chain
RM64.00
- CUP OIL FILTER WRENCH
- Suitable for various kinds of car
- Die-cast aluminum alloy cup-type wrench, precision polished
- For easy remove tighten oil filter or installation of oil filters
RM21.00
- Drop-forged, heat treated steel
- Cast steel bearing splitter and yoke
- Corrosion-Resistant black oxide finished
- Applies even pressure to smoothly remove gears from shaft without damage
- For automotive and industrial usage
- To draw out pullers, bush and bearings
RM240.00
- DOUBLE LOCK JACK STAND
- Double safety pin (Patented design)
- Heavy duty adjustable stand with double locking protection
- Handle provides ease of positioning and carrying
- Large saddle column provides and self-locking ratchet action height adjustment
- For safely lift up your automobile when need to work underneath
RM180.00
- HYDRAULIC BOTTLE JACK
- Screw top extends and precisely adjusts lifting height
- Two-piece pump handle for use in tight spaces and compact
- Storage operates in vertical or horizontal positions
- Hardened, machined and polished ram & plunger for smooth operation
- For heavy lifting and auto repair
- Ideal for automotive, truck, farm, industrial and construction work
RM44.00
- HYDRAULIC BOTTLE JACK LOWER PROFILE
- Screw top extends and precisely adjusts lifting height
- Two-piece pump handle for use in tight spaces and compact
- Storage operates in vertical or horizontal positions
- Hardened, machined and polished ram & plunger for smooth operation
- For heavy lifting and auto repair
- Ideal for automotive, truck, farm, industrial and construction work
RM335.00
- HYDRAULIC TOE JACK
- Extra wide base for maximum stability
- 360° handle socket for operation from any direction
- Load can be applied to toe or head
- For use where exceptionally low pick up height is required
- For safely lift up your automobile when need to work underneath
RM899.00
- Quick tighten and release design
- For inserting the piston with ring into the cylinder
- High quality spring steel band with square drive adjuster included
- Supplied with Allen key
- Used for assembling pistons of car’s engine with pistons rings into the cylinder
RM25.00
- Chrome plated steel screw with swivel pad
- Heat treated steel bar
- Hardwood screw handle
- Use for a firm hold on your metal fabricating or woodworking projects
RM78.00
Capacity | 10cm – 9999.9m | |
Wheel Diameter | 159.9mm / 6in. | |
Weight | 0.55kg | |
Length | 1110mm (Overall) | |
550mm (Folded) | ||
Increment | 0.1m |
RM149.00
- 2 TON LOW PROFILE FLOOR JACK
- Built in safety valve provides overload protection
- Heavy duty steel construction provides long term durability
- Bypass device protects against over-pumping for safer operation
- For safely lift up your automobile when need to work underneath
RM138.00
RM195.00
- 3.5 mm sk5 hard chromed blade
- 0.3 mm sk4 antitrust cutting blade
- Black nylon, 30% fiberglass handle, switch
- PVC chopping block
- Built in locking mechanism for additional safety
RM58.00
- Stainless steel blade
- Pocket size, foldable, easy to carry
- Durable plastic handle
RM26.00
- Made of heat treated high grade alloy steel
- To loosen hard to turn stud
- Compact and powerful
- The tighter the stud, the tighter the grip
- Ideal for removes studs, rounded nuts or bolts
RM48.00
- TWO SETS BEARING SEPARATOR KIT
- Drop-forged, heat treated steel
- For automotive and industrial usage
- Cast steel bearing splitter and yoke
- Pull out the bear with the H- type beam and bolt
- Design for safely remove bearing, gears, pulleys, and steering wheels
RM350.00