|Product SKU||HIKOKI WH18DBDL2|
Three strikers on the hammer offers greater comfort with less cam-out - The hammer with 3 strikers reduces vibration by making 3 impacts per rotation instead of the conventional 2. This results in greater comfort and less cam-out (driver slippage from screw head), and works great for light-duty applications such as fastening short or thin screws. In order to suit various applications, a 4-step tightening mode selector function is also incorporated.
Power mode - When enabled under heavy load, the power mode dramatically increases the impact energy by reducing the impact rate to 1.5 impacts per rotation and extending the interval between successive impacts. This mode is ideal for long or thick screws.
Newly Designed Airflow system for Optimal Cooling Efficiency - The rear fan efficiently cools down the motor and hammer case for more durability.
Well-Balanced Weight Distribution for Better Work Efficiency - Less user fatigues due to the well-balanced design with the center of gravity positioned at the middle finger of the grip hand.
IP56 Dust and Water Resistant: Thanks to the unique design of dust-protective cooling windows and fully plastic coating on some important inner parts, this product conforms to IP56 protection class ratings (dust and water resistance) for electrical equipment as stipulated by the international IEC regulations.
* The equipment has been designed to withstand the effects of dust and water, but there is no guarantee that it will not malfunction. Do not use or leave the equipment in locations where it is subject to excessive amounts of dust, or in locations where it is submerged in water or subject to rainwater. (Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.)
Capacity: Machine Screw: 4-10 mm; Bolt: M5-M18; High Tension Bolt: M5-M14
No Load Speed: 0-2.900 min
Drive: (1/4") Hex Bit Shank
Max. Torque: 207 Nm
Full Load Impact Rate: 0-4000min
Battery: 18 V (5.0 Ah)