GTM-PBS9DQC Angle Grinder (2)
Hand Tools
Welcome to www.hand-tools.com.my & www.amatrix.com.my
Angle Grinder (2)
Sort by
Show result
  • 680W, 10,000rpm provides high power and speed for 100mm grinding applications
  • Advanced fan system provides maximum airflow prolonging motor life
  • Sealed toggle switch provides protection from dust and fillings, extending switch life
  • Spindle lock for quic and easy disc change
  • Compact gear case allows use in tight and confined areas
  • Accessible brushes for easy brush replacement and less downtime
RM195.00
  • 100mm small angle grinder
  •  Special plastic glue layer to protect against desert metal stator
  •  Body compact hand held peasant feeling
  •  Fast cooling system for added durability
  •  Run fast, powerful
  •  Rotor dustproof protection
RM215.00
  •  850 watts of powerful motor with 64% increase of operating capacity.
  •  Slim and compact design provides comfortable handling.
  •  Cut-off brushes to prolong motor life.
RM245.00
  •  850 watts of powerful motor with 64% increase of operating capacity.
  •  Slim and compact design provides comfortable handling.
  •  Cut-off brushes to prolong motor life.

 

RM245.00
  • - Soft start to limit start up current and reduce kick back
  • - Fitted with anti vibration side handle, quick adjustment tool free guard.
  • - Abrasion protected high power motor for increased motor durability, with fully leaded starter windings for increased motor durability.
  • - Five positions on side handle for improved balance in cutting and grinding applications.
  • - Cut off brushes to prolong motor life, and dust sealed bearings for prolonged product life
  • - With spindle lock
RM658.00
  • Labyrinth construction protects all ball bearings from dust and debris.
  • Small circumference barrel grip for easy handling.
  • Shaft lock for easy wheel changes.
  • Easier repairing of gear section assembled with key.
RM244.00
  • Disk guard quick adjustment
  • Spindle lock
  • Metal gear head
  • Additional handle can be fitted in 3 positions
  • Flange nut wrench in the additional handle
  • Soft grip
  • Low in vibrations
  • Cable clip
  • Cutting disk not included
RM322.00
  • Small and rotatable gear housing.
  • Large trigger switch.
  • Lightweight.
RM498.00
  • Increased heat resistance.
  • Superior anti-dust structure.
  • Machined bevel gear for strength.
  • Soft grip for more comfort and control.
  • Gear housing can be positioned at every 90 degrees.
RM498.00


Continuous Rating Input      2000 w
Capacity    Depressed Center Wheel : 230mm (9")
Wire Cup Brush : 110mm (4-3/8")
Cut-off Wheel : 230mm (9")
No Load Speed    6600 rpm
Dimensions (L x W x H)    432mm x 250mm x 132mm
Net Weight    4.7kg
Power Supply Cord    2.5m

RM526.00
  • Increased heat resistance.
  • Superior anti-dust structure.
  • Machined bevel gear for strength.
  • Soft grip for more comfort and control.
  • Gear housing can be positioned at every 90 degrees.
RM600.00
  • Labyrinth construction protects all ball bearings from dust and debris.
  • Small circumference barrel grip for easy handling.
  • Shaft lock for easy wheel changes.
  • Easier repairing of gear section assembled with key.
RM263.00
  • Powerful motor delivers more output for increased performance
  • Gear housing rotates 90° for operator convenience
  • Refined Design at only 2.2kg (4.8 lbs)
  • Labyrinth construction seals the motor from dust and debris by creating a complex set of channels prohibiting contamination
  • Externally accessible brushes for greater serviceability
  • Soft Grip for more comfort and control
  • Ideal for welders, fabricators, Masons, Maint/Repair etc.
RM395.00
Depressed Center Wheel   125mm (5")
Wire Cup Brush 90mm (3-1/2")
Avrasive Disc 125mm (5")
Diamond Wheel 125mm (5")
Input 1050W
No Laod Speed 11,000rpm
Overall Length 256mm (14")
Net Weight 2.5kg
Power Supply Cord 2.0m
 
RM451.00

 

  • Bosch tools – Angle Grinder GWS 20-180
  •  
  • · The lightweight and compact tool
  • · Powerful 2000W motor
  • · Light and compact for optimum handling
  • · Armoured coils that protect the motor against sharp grinding dust ensure long lifetime
  • · Revolving gear head enables optimised adaptation to every work situation
  • · Triple-control safety switch
  • · Bosch SDS quick-locking nut available as an accessory
  • · Individual barcode for easy tool identification Technical Data Rated power input: 2000 W
  • No-load speed: 8500 rpm
  • Grinding spindle thread: M 14
  • Main handle: Shaft
  • Disc diameter: 180 mm
RM478.00
  • Bosch tools – Angle Grinder GWS 6-100
  •  
  • · Handy & Compact
  • · 670 watts of power
  • · Good handling due to ergonomically adapted housing
  • · Spindle lock for easy disc change
  • · Flat gear head for working in tight spaces
  • · Gear head can be rotated in 90° steps
  • · Armoured coils that protect the motor against sharp grinding dust ensure long lifetime
  • · Anti-rotation protective guard – easily adjustable, provides reliable protection
  • · Cut-out carbon brushes
  •   
RM225.00
  • BOSCH GWS13-125CI 5" Angle Grinder 1300W, 11500rpm
  • 5" Angle grinder with maximum productivity and best user protection.
  • Features
  • Maximum Productivity and performance due to improved combination of motor, cooling and electronics. 
  • Long carbon brush lifetime, strong motor Improved cooling and dust protection, motor overload protection. 
  • Superior user protection with KickBack Stop, Anti-vibration auxiliary handle & Restart protection.
RM460.00
  • BOSCH GWS17-125CI 5" Angle Grinder  1700W, 11500rpm
  • 5" Angle grinder with maximum productivity and excellent user protection.
  • High work progress due to powerful 1700-watt motor with Constant Electronic.
  • Long life due to motors with direct motor cooling, overload protection and long carbon brush lifetime.
  • Leading user protection due to KickBack Stop, restart protection, rotation protective guard and reducing vibrations.
  • Good handling thanks to slim housing with softgrip surface for a secure grip.
  • Optimised air routing and improved protection against dust.
  • Vibration Control auxiliary handle with 40% vibration reduction for low-fatigue working (EN 60745).
  • Smooth start and starting current limitation.
  • Rotatable gear head in 90 ° increments.
  • Handle left and right hand.
  • Large spindle-lock for quick and easy exchange of the insertion tool.
RM520.00
  • BOSCH GWS580 4" Angle Grinder 580w, 11000rpm
  • 580watts of power.
  • Good handling due to ergonomically adopted housing.
  • Spindle lock for easy disc change.
  • Flat gear head for working in tight spaces. 
  • Gear head can be rotated in 90° steps. 
  • Armoured coils that protect the motor against sharp grinding dust ensure long lifetime. 
  • Anti-rotation protective guard – easily adjustable, provides reliable protection. 
  • Cut-out carbon brushes. 
  • Handle can be used on right or left. 
  • Safety switch
RM168.00
  • BOSCH GWS750-100 4"Angle Grinder  750W, 11000rpm
  • Superior grinding and cutting performance due to high power and high torque.
  • Great hand control due to palm fit gripping and ergonomic design.
  • Long lifetime under tough working environment and heavy load due to robust design and parts.
  • Rated power input 750 W
  • No-load speed 11000 rpm
  • Grinding spindle thread M10
  • Disc diameter 100 mm
  • Rubber sanding plate, diameter 100 mm
  • Wire cup brush, diameter 70 mm
  • Dimensions (L x W x H) 270mm x 73mm x 100mm
  • Weight without cable 1,8 kg
RM215.00
  • Bosch tools – Angle Grinder GWS 8-100 Z
  • · Powerful and safety enhanced
  • · Robust & strong motor with 800W
  • · M10 Spindle thread for readily available accessories
  • · Improved electrical switch for stringent operation
  • · Sufficient air inlets for optimal air flow and cooling
  • · Paddle switch for maximum safety operation
  • · Spindle lock for quick disc change
  • · Burst proof guard to provide maximum safety to users Technical Data Rated power input: 800 W
RM270.00
  • Superior grinding/cutting performance due to high power and torque at 900w.
  • Best-in-class hand control due to palm fit grip size and ergonomic design.
  • 3 Long life time under tough working condition and heavy working load due to robust design and components.
  • Rated power input 900 W
  • No-load speed 10000 rpm
  • Grinding spindle thread M10
  • Disc diameter 100 mm
  • Rubber sanding plate, diameter 100 mm
  • Wire cup brush, diameter 70 mm
  • Dimensions (L x W x H) 280mm x 73mm x 100mm
  • Weight without cable 1,9 kg
RM308.00
  • Labyrinth construction protects all ball bearings from dust and debris.
  • High quality motor with excellent hear-resistance.
  • Small gear housing provides easy handling and high maneuverability.
  • Field coated with powder varnish to protect from dust.
RM185.00
  • Brand Stanley
  • Input Power 580W
  • Voltage 220V ~ 240V
  • Disc Capacity 100mm
  • Switch Tongle
  • No Load Speed 12,000 RPM
  • Weight 1.55KG
RM105.00
RM135.00