GTM-PBS9DQC Electrical Tester
Hand Tools
Welcome to www.hand-tools.com.my & www.amatrix.com.my
Electrical Tester
Electrical Tester

Electrical Tester

Sort by
Show result
  • For all applications (live or dead cables) without additional instruments
  • Set includes a transmitter and a receiver
  • Proven digitally coded sender signal guarantees clear signal identification
  • Transmitter with LC-display for transmitting level, transmitting code and external voltage
  • Receiver with a backlight LC-display for level of receiving signal, code of receiving signal and live voltage indication
  • Automatic or manual adjustment of receiving signal sensitivity
  • Acoustical receiving signal switchable
  • Auto-Power-Off
  • Additional torch lamp function for working in dark environments
  • Additional transmitters are available for extension of to distinguish between several signals
RM5,874.00

Features and benefits of the T+

  • 3 forms of AC/DC voltage indication: light, sound, and vibration for added user protection and convenience
  • Detect live voltage even when the batteries are dead
  • Extra heavy-duty, replaceable test leads for more flexibility and durability
  • CAT IV 600 V, CAT III 1000 V rated for added user protection
  • Continuity beeper
  • Bright LED flashlight for work in poorly lit areas
  • GFCI Trip
  • On/Off switchable beeper, selectable according to your environment
  • Compliant with latest NFPA 70E recommendations*
  • Replaceable test probes for added flexibility and convenience
  • Convenient probe storage on the back
  • Probe holder for easier testing
  • Hazardous voltage warning light for added user protection
  • Test lead strap included for better test lead management
  • AC/DC Voltage: 12 V – 600 V on LED bar
  • Auto-off saves battery power
  • 2-year warranty

* When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment

RM428.00

Features and benefits of the T+PRO:

  • Backlit LCD display for easier viewing
  • Display resolution of 0.1 V, ideal for troubleshooting low-voltage lighting
  • Resistance (Ohms) to 9.99 kOhms
  • Rotary Field Indication
  • Display Hold for easier viewing in hard-to-test areas
  • 3 forms of AC/DC voltage indication: light, sound, and vibration for added user protection and convenience
  • Detect live voltage even when the batteries are dead
  • Extra heavy-duty, replaceable test leads for more flexibility and durability
  • CAT IV 600 V, CAT III 1000 V rated for added user protection
  • Continuity beeper
  • Bright LED flashlight for work in poorly lit areas
  • GFCI Trip
  • On/Off switchable beeper, selectable according to your environment
  • Compliant with latest NFPA 70E recommendations*
  • Replaceable test probes for added flexibility and convenience
  • Convenient probe storage on the back
  • Probe holder for easier testing
  • Hazardous voltage warning light for added user protection
  • Test lead strap included for better test lead management
  • AC/DC Voltage: 12 V – 600 V on LED bar, 10.2 V – 600 V on LCD
  • Auto-off saves battery power
  • 2-year warranty
RM580.00
  • Voltbeat™ technology and continuous self-test – so you always know it's working
  • Upon detection, tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Expanded range: 90 V AC to 1000 V AC
  • 20 V to 90 V AC control circuit model also available
  • Two-year warranty
  • Batteries included
  • On/Off Button
  • Audible/Silent
RM175.00
  • Voltbeat™ technology and continuous self-test – so you always know it's working
  • Upon detection, tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Expanded range: 90 V AC to 1000 V AC
  • 20 V to 90 V AC control circuit model also available
  • Two-year warranty
  • Batteries included
  • On/Off Button
  • Audible/Silent
RM195.00
  • 3 phase indication
  • Indication of phase rotation
  • Clear LCD display
  • No battery required
RM1,950.00
  • 3 phase indication
  • Indication of phase rotation
  • Indication of motor rotation direction
  • Contact free determination of the rotation direction of running motors
Technical Specifications
Voltage range
   Up to 400 V
Phase Display
   120-400 V AC
Frequency range
   2-400 Hz
Operating timer
   Continuous

 

Environmental Specifications
Operating temperature
   0 °C to 40 °C
Operating Altitude
   Up to 2000m
Humidity (Without Condensation)
   15 % to 80 %
Dust/water resistance
   IP 40

 

Safety Specifications
Electrical Safety
   EN 61010,
   EN 61557-7
Overvoltage category
   CAT III, 300 V

 

Mechanical & General Specifications
Size
   124 x 61 x 27 mm
Weight
   1 x 9 V
Batteries
   1 x 9 V
Warranty
   2 years
 
 
RM1,950.00
  • Dual Sensitivity
  • LED light with 100,000 hour life
  • Detects from 90 to 600 V AC
  • Rated to CAT IV 600 V
  • Dual Levels of Detection
  • Blue indicates proximity to AC Voltage source
  • Red indicates you’re at the source
  • Operating temperature 0 deg C to 50 deg C
  • Ultra-Bright White LED
  • 100,000 hr bulb
  • AAA battery included
RM235.00
  • Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
  • New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement
  • Double insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures
  • Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure
  • Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs
  • Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
  • TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip
  • Probes always show correct category rating for tip being used
  • Environmental ratings: -20°C to 55°C (-4°F to 131°F), altitude: 2000 m (6,562 ft)
  • Conforms to EN61010-031
  • One-year warranty
RM185.00

• True RMS reading is an essential feature for accurate measurement.
• “Non Contact” voltage function indicates the presence of AC voltage by warning the user with an audible signal.
• Set the DC current range to zero in one touch with the Zero Adjust function.

RM550.00

• New technology permits safe testing, without the need of direct contact between probes and live wires.
• The insulated crocodile clips can clip insulated cables from φ2.4 to 30mm.
• Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
• The instrument can be fixed to a metal panel via the magnet on the back side.
• Wide measuring range for 3 phase installations from 70V to 1000V AC.
• Super brightness function permits clear LED's indication also in sunshine.
• Complies with IEC 61010-1 CAT IV 600V and CAT III 1000V.

RM1,200.00

• AC and DC voltage tests up to 690V with LED
• Comply with the latest standards IEC 61243 and IEC 61010
• Novel design
Large and bright LEDs: Values are visible in the dark place
Ergonomic design fits in the hand
• Two functions are available in one model
"Measurement without battery" and "Self Test (all LED on)"
• Test leads withstand harsh environments at low temperature
• Penlight (white LED)
• Auto-power ON/OFF
• Audible indication
• Variable test tips, φ2mm or φ4mm
• Probe protection cover can store the attachment of caps
• IP65 (IEC 60529)

RM400.00

• AC and DC voltage tests up to 690V with LEDs and LCD 
• Comply with the latest standards IEC 61243 and IEC 61010 
• Novel design
Large and bright LEDs: Values are visible in the dark place
Ergonomic design fits in the hand 
• Two functions are available in one model
"Measurement without battery" and "Self Test (all LED on)" 
• Test leads withstand harsh environments at low temperature 
• Penlight (white LED) 
• Auto-power ON/OFF 
• Audible indication 
• Variable test tips, φ2mm or φ4mm 
• Probe protection cover can store the attachment of caps 
• IP65 (IEC 60529)

RM520.00
  • Blue LED inside, measurement can be indentified clearly even in dark area.
  • Auto-detecting function for battery power examination
  • Pen-size, handy tester for quick and easy AC/DC voltage testing
  • AC Voltage Test: 70 to 250VAC
  • DC Voltage Test: Up to 12,36,55VDC
RM23.00
  • ProsKit NT-309 Smart Non-Contact Voltage Tester
  • CAT III 1000V Safety rating.
  • Detects AC voltage from12 to 1000 VAC without metallic contact.
  • Compact size with pocket clip easily fits into pockets or tool pouches.
  • Voltage level indication, red LED and audible alarm if voltage is present.
  • Entire outer surface is non-conductive for safety, helps avoid high voltage shock.
  • Built-in white LED illumination light provides convenient work in dark areas.
  • Powered by two 1.5V AAA batteries (not included)
  • Ideal for electricians, maintenance staff, service and safety personnel, and even homeowners.
RM46.00
  • UNI-T's UT07A-UK socket tester is suitable for detecting socket wiring for all British sockets.

 

RM46.80
  • UNI-T UT12A non-Contact AC voltage detector spots 90 to 1000 V AC voltage indicating it with beeper sound and LED flashing.

 

RM34.00
  • multifunctional and universal power meter socket
  • With high precision, low price, accurate measurement and lightweight size
  • A functional mini electric meter to save power
  • It can be widely applicable to many occasions such as family, school and shared apartment
  • It great to measure the electricity consumption
RM108.00
  • UT230B series products are multiple function intelligent power meters. User could takeit as power meter, electricity meter, voltage meter, current meter, energymeter.
  • Areaof Application: Household, Factory, School, apartment, and so on.
  • Certifications: CE, RoHS, ETL, EN 61010-1 & UL 61010-1 & EN 61326-1
RM100.00
RM120.00