- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
• No pick up when generator is killed.
• Prevent form Audio lock up or Computer down when changing the car battery.
• Power supplier for home electric appliances.
• Emergency power supply.
• Easy and quick charge.
• Size:320 x 85 x 240mm
• Weight:9kgs
- Automatically maximizes battery life and performance with a built-in battery health mode
- Hybrid LED battery charging gauge with LCD display
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- 12V ultra-compact multifunction emergency portable starter for motorcycles, automobiles, campers, marine engines etc.
- Fit with two USB outputs (1A-2,1A) to charge (power bank) electronic devices (tablets, smartphones, MP3 players, notebooks, cameras etc.), two 12/19V outputs to power laptops and other devices and two high intensity emergency LED lights.
- It uses high-efficiency lithium LiPo polymer cells that provide rapid and complete charging, constantly monitored by a series of LEDs.
- Protection against polarity reversal.
- Complete with starting cables, various connectors for mobile devices, cigarette lighter plug and wall charge.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- Battery: Li-polymer
- Recharge power input: +15V DC/1A
- Power supply outputs: 5V/12V/19V/24V-2.1A/3.5A/400A
- Capacity:23.1Ah
- Size: 190*150*90mm
- Weight: 1kg
- Full charge time: 5 hours
- Starting current: 400A
- Peak current: 800A
- Working temperatures: -40 - 85°C
- Cycle lifespan: 3,000+ times of recharge
- Features: LCD screen, 24V professional for trucks & diesel, high rate jump start
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- Microprocessor-controlled automatic charger
- Diagnostic system
- LED display (battery status, trickle charging, unit on, charging, and errors)
- Push button for setting charging current
- Charging leads with sturdy terminal clamps
- Power switches
- Electronic overload, voltage reversal and short-circuit protection.
- Microprocessor-controlled automatic charging
- fault diagnosis system
- LED indicators for power, voltage, battery fully charged battery is loaded, error
- Pressure switch for setting the charge current ( 2/6/12 amps)
- Pressure switch for on / off
- Pressure switch for 12 volts dc Output on / off with LED indicator
- Pressure switch for current battery voltage
- Charging cable with terminal clips
strong - Fault output to triple-digit LED display
- cigarette lighter socket for 12 volt dc
Output - Electronic overload, reverse polarity and short circuit protection
- Power cable with European plug
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Sheet steel housing
- Carrying handle
- Built-in ammeter
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Sheet steel housing
- Carrying handle
- Built-in ammeter
- Switch for 6 V and 12 V
- Switch for car and motorcycle
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
- All-insulated construction
- Overload- and fals poling- and short-circuit protection
- Charging electronic
- Sheet steel housing
- Carrying handle
- Switch for automatic and normal charging
- Switch for normal and rapid charging
- Built-in ammeter
- Mains cable with europe plug
- Charging leads with sturdy pole clamps
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- EMERGENCY AID KIT FOR CHARGING & STARTING
- UNIVERSAL (12V )PETROL & DIESEL JUMP STARTER + CHARGER
- POWERFUL 12V VEHICLE BATTERY
- EXTREME BRIGHT LED TORCH LIGHT
- JTC1131 CAN TOP VALVE
- • Designed to use on the service can for pack oil and Dye.
- JTC1524A BATTERY / ANTIFREEZE FLUID TESTER
- • Freezing:-60℃~0℃
- • Antifreeze:0℃%100%)
- • Batty:1.000~1.400sg
- JTC3046 BOOSTER CABLE
- • Connect the power to the weak battery vehicle and start the vehicle.
- • Special rubber cable material to prevent oil and extend working life.
- JTC3047 BOOSTER CABLE
- • Connect the power to the weak battery vehicle and start the vehicle.
- • Special rubber cable material to prevent oil and extend working life.
- JTC5632 TUBE CUTTER & FLARING TOOL
- • Contents: Tube cutter: 1/8" ~ 1-1/8"
- Flaring tool: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", & 5/8"
- • Another kit JTC-5632-mm with metric size size: 4, 6, 8, 10, 12, 14, 16mm.
- JTC5633 LARGE TUBE CUTTER & FLARING TOOL SET
- • Accurately flares and swages soft copper, aluminum an dbrass tubing.
- • Die holding bolck operates with 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8",3/4" outer diameter tubing
- • 5 spreaders swage 3/16",1/4",5/16",3/8",1/2",5/8",3/4" outer diameter tubing.
- • Tube cutter capacity 1/8" To 1 1/8
- Test Condition without Shutting Down Battery.
- Simultaneously Measure Battery Resistance, Voltage, Current.
- Compact and Lightweight.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
|
SMART 450 |
|
220v ~ 240v (1 phase 50hz) |
|
450A |
|
12V ~ 24V |
|
1 ~ 60A (Adjustable) |
|
12V Start – 5.4 KW / 24V – 8.4K |
|
37.0kgs |
- Charging Voltage( VDC ):12V
- Charging Current ( A ):5A
- Dimensions H x L x W:120X160X220
- Weight ( kg ):3.0
|
STM2420 |
|
220v ~ 240v (1 phase 50hz) |
|
2 x 12v |
|
Max 20A (Selectable) |
|
Input Fuse 5A, Output MCB 25A |
|
340mm x 330mm x 300mm |
|
16.5kg |
|
STM2460 |
|
220v ~ 240v (1 phase 50hz) |
|
350A |
|
12V ~ 24V |
|
1 ~ 60A (Adjustable) |
|
12V Start – 4.2 KW / 24V – 8.4K |
|
50.5kg |
|
STM 4810 |
|
220v ~ 240v (1 phase 50hz) |
|
4 x 12v |
|
Max 10A (Selectable) |
|
Input Fuse 5A, Output MCB 15A |
|
340mm x 330mm x 300mm |
|
16.5kg |
|
STM 9610 |
|
220v ~ 240v (1 phase 50hz) |
|
8 x 12v |
|
Max 10A (Selectable) |
|
Input Fuse 7A, Output MCB 15A |
|
340mm x 330mm x 300mm |
|
25.0kg |
|
STM 2410 |
|
220v ~ 240v (1 phase 50hz) |
|
2 x 12v |
|
Max 10A (Selectable) |
|
Input Fuse 3A, Output MCB 16A |
|
240mm x 270mm x 160mm |
|
8.0kg |