GTM-PBS9DQC Engine Series
Hand Tools
Welcome to www.hand-tools.com.my & www.amatrix.com.my
Engine Series
Sort by
Show result

 

  • Drop-forged, heat treated steel jaw
  • Hardened and tempered, precision machined center bolt
  • Sliding T – bar handle applies even force
  • Black oxide finished for durability
  • 3 jaw design for greater leverage and easy pulling
  • Removes all sleeve type bearing with 1/2” – 2” inside diameter
RM70.00
  • The 100mm length allows easy access to recess head bolts.
  • Come with 1/2" drive for using with a torque wrench.
  • Use for TOYOTA Tercel cylinder head bolt.
RM18.00
  • KT-3408-10  10” Hose Pinch-Off Pliers
  • The pinch-off pliers act as a third hand to help you keep hose changed tightly when you are servicing various engine components.
  • Swivel jaws for level clamping.
  • Locking ratch provides tight grip in just about any position.

 

RM39.00

 

  • Heat treatment and drop forged
  • For removal replacement of oil drain plugs
RM68.00
  • KT-3408-12  12” Hose Pinch-Off Pliers
  • The pinch-off pliers act as a third hand to help you keep hose changed tightly when you are servicing various engine components.
  • Swivel jaws for level clamping.
  • Locking ratch provides tight grip in just about any position.
RM45.00
  • 14" valve spring compressor
  • Suitable for service/repair work on small to medium sized OHC engines as well as for general use on OHV and CVH models
  • Jaw capacity: 60-155mm
  • Throat depth: 160mm
RM95.00
  • This is a traditional style cooling system pressure testing kit with an updated selection of adaptors to fit popular European and Japanese vehicles including Alfa, Audi, BMW, Benz, Chrysler, Citroen, Ford, Honda, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Suzuki, Toyota, Volvo, VW.
  • Also includes non-specific adaptors for other makes and models.
  • Locate system leaks from: Head gasket. Header tank. Radiator and heater cores. Water pump plugs, hoses and housings.
  • Quick-release couplings and a high-powered pump with large, easy-to-read dial are featured in this kit and the kit is packed in a large blow moulded case which is supplied with operating instructions.
RM1,125.00

 

  • Quick release & best suited for limited access areas
  • Uniform load distribution and self-centered
  • Through reversing the arms internal & external application are possible
  • Supplied with different leg variants and hydraulic thrust spindle
  • Extremely robust spindle with inductively hardened thread
  • To draw out pullers, bush and bearings
RM555.00
  • Self locking ratchet pawl prevents premature release and allows positive locking action.
RM35.00
  • Used for TOYOTA, HONDA bolts of fuel filter cup.
  • Full length is 93mm, suit for narrow place.
  • Special design with cover for holding the nut completely and prevent slipping.
RM67.00
  • Stainless steel points
  • It contains awl, hook tool, 45 & 90 degree bent tool.
  • Using for detail works and scribing, picking jobs.
RM27.00
  • CHAIN OIL FILTER WRENCH
  • Aluminum Handle
  • For all type oil filters, radiator caps and hub caps use
  • Can be used in both direction without being removed
  • Fully adjustable universal chain design fit any diameter oil filter
  • Suitable for use in hardened pipes and oil filter
RM13.00
  • SIZE : M14-M16-M18*43mmL
  • M14-M16-m18*78mmL
  • M14 For 500Series since 12/1995, 900 since 06/1996, rear hubs L/T Transporter 
  • M16 Rear hub on Sharan
  • M18 Rear hubs on golf 
RM170.00
  • CHAIN OIL FILTER WRENCH
  • Drop forged carbon steel
  • Both direction usage
  • Adjustable universal chain design
  • Suitable for use in hardened pipes and oil filter
RM12.00
  • KT-3408-08  8” Hose Pinch-Off Pliers
  • The pinch-off pliers act as a third hand to help you keep hose changed tightly when you are servicing various engine components.
  • Swivel jaws for level clamping.
  • Locking ratch provides tight grip in just about any position.
RM35.00
  • CHAIN OIL FILTER WRENCH
  • For all type oil filters, radiator caps and hub caps use
  • Can be used in both direction without being removed
  • Fully adjustable universal chain design fit any diameter oil filter
  • Suitable for use in hardened pipes and oil filter
RM24.00
  • Use with 3/8” Dr. or 21mm wrench. 
  • Size:27/6P,32/6P,36/6P,76/14P,75.6/14P,86/16P,76/12P,93/15P 
  • With a specialized 21mm wrench 
  • Applicable: ENZ,BMW,VOLVO,VW,FIAT,RENAUIT,HONDA, MAZDA,NISSAN,TOYOTA..etc.
RM316.40

Size:27/6P,32/6P,36/6P,76/14P,75.6/14P,86/16P,76/12P,93/15P
-With a specialized 21mm wrench
-Applicable,ENZ,BMW,VOLVO,VW,FIAT,RENAUIT,HONDA, MAZDA,NISSAN,TOYOTA.etc.

RM351.90
  • FACILITATES ASSEMBLY AND DISASSEMBLY 
  • -SUITABLE FOR MERCEDES 220 / 221 / 230 SERIES 
  • -HEAVY DUTY TYPE
  • -185MM COMPRESSION SPINDLE WITH 24MM HEX DRIVE
  • -2 COMPRESSION HEADS 40MM AND 54MM
  • -3 PRESSURE PADS 22MM, 33MM, AND 57MM
RM599.00
  • Two cylinder design for easily fix the tension pulley, adjustment by the 1/4'' wrench.
  • Application : Mitsubishi model with injection engine.

 

RM17.00
  • BELT TYPE OIL FILTER WRENCH
  • Designed with adjustable belt type
  • Suitable for all type oil filters,radiator caps and hub caps use
  • Satin finished, drop-forged steel body with hanging hole
  • Used to remove oil filter from trucks and cars
RM21.00
  • Range : 3/4"~2-1/2"(19-64mm)
  • Stone size : 28.5x5x3 (3pcs)
  • Collar prevents stone breakage.
  • Sleeve makes insertion in cylinder easy and protects stones when not in use.
RM39.00
  • Range : 2"~7"(51-178mm)
  • Stone size : 100x10x8 (3pcs)
  • Collar prevents stone breakage.
  • Sleeve makes insertion in cylinder easy and protects stones when not in use.
RM125.00
  • Easy-reading 2-1/2" diameter gauge features color-coded quadruple calibrations with 0-300 psi, 21 kg/cm, 21 bar & 2100 kpa.
  • 13" durable rubber hose with 14mm/18mm adapter.
  • 6" heavy-duty stem with universal rubber cone adapter fits all plug holes.
RM119.00
RM160.00
  • CUP OIL FILTER WRENCH
  • Suitable for various kinds of car
  • Die-cast aluminum alloy cup-type wrench, precision polished
  • For easy remove tighten oil filter or installation of oil filters
RM21.00
  • This model of remover is special design to fit the deep valve.
  • Maximum depth : 217mm
  • Maximum : 23φ
  • T handle with ON-OFF function, it is more convenient for user.
  • Using the claw to hold is tighter and not easy to come off when you are working.
RM175.00
  • Designed to check engine oil pressure in both cars and trucks. Easy to read dual scale gauge. Complete with 24" (600mm) of oil proof hose with 1/8"NPT.
  • Also includes 1/4" NPT and 3/8" NPT adaptors.
  • Dual gauge readings: 0 to 300psi (0 to 21bar)
  • Gauge diameter: 2.5"
RM175.00

CODE

L

(MM)

H

(MM)

 

 

74- HR110

190

35

 

RM8.00
  • Drop-forged, heat treated steel
  • Cast steel bearing splitter and yoke
  • Corrosion-Resistant black oxide finished
  • Applies even pressure to smoothly remove gears from shaft without damage
  • For automotive and industrial usage
  • To draw out pullers, bush and bearings
RM240.00
  • Special designed to align the engine timing.
  • Applicable: FORD: KA 1.3TDCi
  •               FIAT: Punto, Panda, Idea, Dublo 1.3JTD
  •               SUZUKI: Ingis, Wagon, Swift 1.3 CDTi
  •               VAUXHALL/OPEL: Agila, Corsa, Combo, Astra, Tigre, Meriva 1.3CDTi 
RM510.00
  • JTC-4302 DIESEL COMPRESSION TESTER (37 PCS)
  • • Common checking diesel compression tester with wide range of adaptors.
  • • Test process must be under vehicle cranking condition.
  • • Provided high quality hydraulic gauge with modern design rubber jacket. 
  • • Full glow plug and injector adaptors.
  • • Additional clamp-on adaptors in case provide more application to truck, Van, bus, marine, and agricultural vehicles.
RM0.00
  • JTC1005 COOLING SYSTEM TESTERS
  •  Test cooling system for leaks.
  • • Includes hand pump, test head in a blowmold case. 
  • • Suit for: Nissan, Mitsubishi, Mazda, Subaru, Toyota, Honda, Ford GM, Chrysler, VW, Audi, Volvo, Saab, Mercedes Benz, BMW, Renault, Fiat, Alfa Romeo, Infiniti, Geo, Suzuki, Isuzu, Lexus, Opel, Peugeot, Jeep, Rover, Citron, Truck.
RM1,596.00
  • JTC-1007 MECHANIC STETHOSCOPE
  • • Provides a fast and easy way to locate noises in engines or bearings and other moving parts.
  • • Aluminum alloy probe/needle for finding the exact location of specific noises.
  • • Instrument is shockproof.
  • • Ideal for pinpointing unusual vibration or suspected leaks.
  •  (valves, piston ring, gaskets etc…)
RM96.00
  • JTC1009 DELUXE NOID-LITE SET
  • • The fastest, easiest, most economical way to check electronic fuel injection signals. 
  • • Includes lights to check TBI systems on GM, Ford, and Geo; GM and Bosch PFI systems; and GM’s new SCPI (sequential central port injection) system
RM114.00
  • JTC1010 STRAIGHT EDGE
  • JTC1010 STRAIGHT EDGE Great stability with 5/8” width, 1-3/8” height and 20-1/2” length. Convenient hanging hole and edge protector.
  • • Use with feeler gauges to check for distortion in engine blocks, cylinder heads and flywheels.
RM572.00
  • JTC1022 ENGINE SLING CHAIN SET
  • • For alignment of the engine’s core, special design on the adjustable chain.
RM312.00
  • JTC1113 VACUUM CUP VALVE GRINDER
  • •For hand grinding flat head, unslotted valves. Synthetic rubber vacuum cups are resistant to oil, grease, gasoline and are replaceable.
  • •Cup diameters: 5/8", 13/16", 1-1/8", 1-3/8".
RM39.00
  • JTC1225 FUEL INJECTION TEST SET
  • • 3-1/2” gauge with dual readings of 0-145 psi and 0-1000 kpa. 
  •   Also a low pressure 2-1/2” gauge for an accurate reading below 15 psi.
  • • All adapters, gauges, and hose assemblies feature a quick coupling system for speedy
  •    and efficient testing connection.
  • • The uniquely designed relief valve relieves pressure and allows
  •    checking for sufficient fuel flow.
  • • No need for wrenches or pipe dope.
  • • The specially designed compact, neatly arranged plastic blow-molded box makes storage easy.
  • • Complete with instructions manual.
RM2,142.00
  • JTC1225E FUEL INJECTION TEST SET-EUROPEAN CAR
  • • The set designed for most European car.
  • • Pick up the joints and adapters from #1225.
  • • Model No.: A, AC, C, D, G, F, Mx2, H, J, HA, I, L, Kx2, KA, KB, KC, B, RK, And IM
  • • All the specification is the same as #1225
RM1,163.00
  • JTC1225J FUEL INJECTION TEST SET-JAPANESE CAR
  • • The set designed for most Japanese car.
  • • Pick up the joints and adapters from #1225.
  • • Model No.: A, AC, D, F, E, N, O, P, Q, R, RA, RK, IM, MA, MCA.
  • • All the specification is the same as #1225.
RM816.00
  • JTC1236 Universal Combustion Leak Test Kit
  •  
  • • Spots and locates combustion leaks quickly in cracked or warped heads, leaky gaskets or cracked block. 
  • • Use Leak-Check in the radiator opening with engine idling. The blue test liquid will turn into yellow in 60 seconds if there is a combustion leak, no matter how small. Get exact location of leak by disconnecting one spark plug at a time and retesting. • Completely accurate proof of leak.
  • • Direct or use with 1005 is better. 
  • • 250cc fluid container. 
  • • Patented.
RM0.00

JTC1238 ONE MAN OPERATION-VALVE SPRING COMPRESSOR KIT 

• Easy for single use, operate by a thread bar to fix on right place.

• Large window on the valve pusher to supply more space to replace the valve collets.

• The size of the valve pusher is 22 φ , it could use with on 12V, 16V, 20V, and 24V engine.

• You do not have to remove the cylinder with this tool, it has saved a lot of manpower.

• Patent.

RM638.00
  • JTC1243 DEEP VALVE SEAL REMOVER
  • • This model of remover is special design to fit the deep valve.
  • • Maximum:23φ
  • • Maximum depth: 217mm
  • • T handle with ON-OFF function, it is more convenient when operator uses it.
  • • Use the claw to hole is tighter and not easy to loose when you are working.
  • • Patent.
RM215.00
  • JTC1244 VALVE COLLET INSTALLING & PICK UP TOOL
  • • This tool holds the valve keepers in its magnetic jaws for better adjustment into the valve stem grooves during installation.
  •  • Easily reaches into recessed pocket to retrieve installed valve keepers.
  • • Retrieves small parts from any recessed or limited area.
  • • Contents: 3 pcs valve keeper installing tool
  •                     Flexible magnetic pick up tool
RM158.00
  • JTC1245 AUTOMOTIVE VACUUM & PRESSURE TEST KIT
  • • Attach many kinds of joint to fit most kinds of vehicles.
  • • The body has the switch to control two kinds of pressure conditions. 
  • • Include the parts of brake bleeder. 
  • • Pressure range: positive pressure. 0~60 psi (1~4 inhg) negative pressure: 0~-30 psi (0~-1 inhg)
RM612.00
  • JTC1251 DELUXE NOID-LITE/IAC TEST KIT
  • Set includes seven noid lights for testing GM PFI, FORD TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI, GM MULTEC2,
  •    BOSCH 2 and two IAC signal test lights for GM 1982 or newer, GM TBI and PFI., and GM model 1981 or newer GM model
  •    700 TBI and PFI fuel injection system, and one fibre optic noid lite extension.
  • • Kit comes in a deluxe molded plastic case.
RM229.00
  • JTC1252 VALVE COLLET REMOVER
  • • Full length: 160mm
  • • Designed to remove the valve collet quickly and easily.
  • • The body is with magnetic. When you hit the tool to the valve spring, the collet will be attracted 
  •    by the magnetic.
  • • Patent.
RM99.00
  • JTC1256 ENGINE OIL PRESSURE TESTER
  • • Designed to check engine oil pressure in both cars and trucks. Easy to read dual scale gauge. Complete with 24” (600mm) of oil proof hose with 1/8” NPT.
  • • Also includes 1/4” NPT and 3/8” NPT adapters.
  • • Dual gauge readings: 0 to 300 psi (0 to 21 bar)
  • • Gauge diameter: 2.5”
RM229.00
  • JTC1302 VALVE LIFTER REMOVAL / INSTALL TOOL
  •  
  • •A special design to depress the valve spring for removal of the hydraulic valve lifters.
  • •By pulling up on the tool, the valve spring is depressed and remove the valve spring retainer and then the hydraulic valve lifter can be removed.
  • •Applicable engine: DOHC 1.6 liter and 2.0 liter, 4 cylinder, 1989 and later, 3.0 liter 6 cylinder, 1991 and later, 3.5 liter 6 cylinder,
  • 1995 & 1996.
  • •Applicable: MITSUBISHI, KIA, CHRYSLER
RM95.00
  • JTC1314 UNIVERSAL TWIN / 4 CAM LOCK
  • • Special design to lock twin camshafts to timing marks during timing belt replacement. 
  • • Fit onto sprockets and extends to lock into sprocket teeth. 
  • • Adjustable arms to fit various diameters and tooth pitch. 
  • • Also suitable for locking between cam and diesel injection pump sprockets. 
  • • One man operation. 
  • • Applicable: Gas & Diesel engines.
RM175.00
  • JTC1348 ADJUSTABLE PISTON RING INSTALLER
  • • Make installing piston rings safe and easy without over-expending rings.
  • • Works on most common piston diameter.
  • • Capacity: 3/64” to 1/4” thickness.
RM49.00
  • JTC1349 PISTON RING GROOVE CLEANING TOOL
  • • With three easy-to-set cutter wheels for quick cleaning of grooves.
  • • Sharp steel cutter removes carbon and vanishes from piston ring grooves.
  • • Size: Blade 1: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”.
  •             Blade 2: 2, 2.5, 3, 4, 4.5mm & 1/4”.
  •             Blade 3: 1.2, 1.5, 1.8, 2.8, 5, 5.5mm.
RM150.00
  • JTC1359 DIESEL ENGINE COMPRESSOR ADAPTERS
  • JTC1359 DIESEL ENGINE COMPRESSOR ADAPTERS 
  • • Use with #1364 for C.V.S. system.
  • • The kit with fittings is different from #1364.
RM560.00
  • JTC1364 DIESEL ENGINE COMPRESSION TESTER KIT
  • This is generally the preferred test method, avoids damage to the injector and fuel system contamination. • Gauge range: 0~1000 psi / 0~70 bar. • Application: BMW, MERCEDES-BENZ, CARBODIES, MITSUBISHI, CITROEN, NISSAN, DACIA, OPEL, DIAHATSU, PEUGEOT, FIAT, RENAULT, FORD, ROVER, HOLDEN, SEAT, ISUZU, TOYOTA, LAND ROVER, VAUXHALL, LEYLAND / DAF, VOLKSWAGEN, MAZDA, VOLV…etc.
RM1,122.00
  • JTC1414 COOLING SYSTEM TESTERS (7PCS)
  • • To test water tank and density of water tank cover.
  • • Applicable: Mercedes, GM (Buick), Jeep, Peugeot, Subaru,
  •     Chrysler, Acura, GM (Nova,Spectrum, Sprint), Mitsubishi,
  •     Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Ford,
  •     Honda.
RM738.00
  • JTC1422 BRAKE CYLINDER HONE
  • Range: 3/4"~2-1/2"(19~64mm) 
  • • Stone size: 28.5 x 5 x2 (3pcs) 
  • • Collar prevents stone breakage. 
  • • Sleeve makes insertion in cylinder easy and protects stones when not in use.
RM50.00
  • JTC1423 ENGINE CYLINDER HONE (178mm)
  • Range: 2"~7"(51~178mm) 
  • • Stone size: 100 x 10 x 8 (3pcs) 
  • • Collar prevents stone breakage. 
  • • Sleeve makes insertion in cylinder easy and protects stones when not in use.
RM158.00
  • JTC1424 UNIVERSAL TENSIONING GAUGE FOR CAM BELTS
  • It can be used to adjust the tension on the cam belt where the movement of  timing belt is measured by load(NM).   
  • • Suitable for use on various cam belt widths. 
  • • Easy to use. 
  • • Clear incremental marking with knurled knob for precise measurement. 
  • • Dual scale allows reading from top or bottom of tool.
RM345.00
  • JTC1426 ELECTRONIC DYNAMIC STETHOSCOPE FOR VEHICLE
  • • It intends and designed for car maintenance/repair technicians to
  •    locate the abnormal noise emitting from elements of the vehicle
  •    at a far higher efficiency far more effectively than ever.
  • • High technologies certainly benefit automotive techs and are
  •    applied in engine, power wires, and lines.
  • • With two earphones for the engineer and customer to operate
  •    together for getting confidence from the customer.
  • • Contents: user's guide x 1, earphone x 2, test clamp x 5,
  •    test sensor(with magnet) x 1, nylon fastening tapes x 6, main unit control box x 1,
  •    outer case x 1, magnetic testing probe x 1.
RM1,698.00
  • JTC1430 OVERHEAD VALVE SPRING COMPRESSOR
  • For use on a wide range of OHV, OHC and CHV engines. 
  • • Not suitable for use on engines with deep seated valves. 
  • • Allow valve springs and valve stem oil seals to be replaced with the cylinder head. 
  • • Feature a reversible jaw/adaptor and automatic cam-action locking to a re-determined setting.
RM195.00

JTC1449 COMBINATION ELECTRONIC STETHOSCOPE KIT

• To locate & indentify noise and enable road test diagnosis.

• Super sensitive microphone pick up.

• Defect & isolate noisy components.

• Contents: Flexible non-consuctive shaft

                     Cushioned headphones

                     4 channel sensor selector unit

                     4 pick up sensors-4.8mm ling cords

RM933.00
  • JTC1454 ENGINE CYLINDER HONE (89mm)
  • Range: 1-1/4"~3-1/2"(32~89mm) 
  • • Stone size: 50 x8 x5mm (3pcs) #220
  • • Collar prevents stone breakage. 
  • • Sleeve makes insertion in cylinder easy and protects stones when not in use.
RM62.00
  • JTC-1520 BASIC EXHAUST BACK PRESSURE SET
  • • Enables technician to test exhaust back pressure through oxygen sensor.
  • • Oxygen sensor adapters include M12 and M18 threads.
  • • The special 2-1/4" gauge with rubber protector has two multi-colored bands-idles 2500rpm, with pressure shown in psi and bar.
RM340.00
  • JTC1536 COOLING SYSTEM VACUUM PURGE & REFILL KIT
  • • To pump radiator and cooling system to vacuum by this tool.
  • • Use vacuum to fill with new coolant into radiator.
  • • Furthermore, do not remain air in radiator and cause bad circulation.
RM423.00
  • JTC1620 VALVE SPRING COMPRESSOR KIT
  • Completes service tool kit for OHV & OHC petrol or diesel engines on Audi, Nissan, 
  •     Toyota, Chrysler, Honda, Mazda, Mitsubishi, Porsche, Volve, VW.
RM388.00
  • JTC1621A UNIQUE COMPRESSION TESTER KIT
  • Easy-reading 2-1/2"  diameter gauge features color-coded quadruple calibrations
  •    with 0-300 psi, 21 kg/cm, 21 bar & 2100 kpa.
  • • 13" durable rubber hose with 14mm / 18mm adapter.
  • • 6"  heavy-duty stem with universal rubber cone adapter fits all plug holes.
RM265.00
  • JTC1626 TIMING LIGHT
  • Works on all 12 volt gasoline engines.
  • • High impact ABS housing.
  • • Detachable heavy duty inductive pick-up clamps and leads for easy operation and replacement
RM255.00
  • JTC1711 VALVE SPRING COMPRESSOR
  • Reversible jaw adaptor for multi-valve engines.
  • • Capacity 45-145mm, throated clearance 250mm big window jaw adaptor for easy 
  •    replacement of valve collects.
  • • Dual size in 25mm and 30mm diameter.
RM298.00
  • JTC1716 VALVE STEM SEAL PLIERS
  • Long neck designed to reach into confined area of the seal to grip it for removal.
  • • Gripping serration in the allow them to grasp both original equipment & aftermarket seals 
  •    regardless of the configuration.
RM85.00
  • JTC1717 VALVE SEAL REMOVAL & INSTALLER KIT
  •  
  • Works on both valves still seated or removed.
  • • Precision machined seal driving adapters guide the seal for proper setting.
  • • Set contains:
  •  1-Valve stem seal plier.(JTC-1716)
  •  1-Drive handle 6”(150mm) long.
  •  2-Deep seal driving sockets for seals O.D. 10.8-14.8mm
  •  7-Seal driving adapters fit seals 5,5.5,6,6.6,7,8,&3/8”.
RM320.00
  • JTC1731 UNIVERSAL VALVE SPRING COMPRESSOR
  • Suitable for use on multi-valve petrol & diesel engines with deep seated valves.
  • • Also for use with OHC OHV & CVH engines.
  • • Reversible jaw with 55mm-175mm capacity.
  • • 165mm throat depth.
RM278.00
  • JTC1734 PISTON RING COMPRESSOR 3"X125MM
  • Self locking ratchet pawl prevents premature release and allows positive locking action.
  • • 3” height, capacity 2-1/8” to 5” (53-125mm)
RM62.00
  • JTC1735 PISTON RING COMPRESSOR 3"x175MM
  • Self locking ratchet pawl prevents premature release and allows positive locking action.
  • • 3” height, capacity 3-1/2” to 7” (90-175mm)
RM67.00
  • JTC1736 PISTON RING COMPRESSOR 4"X175MM
  • Self locking ratchet pawl prevents premature release and allows positive locking action.
  • • 4” height, capacity 3-1/2” to 7” (90-175mm)
RM75.00
  • JTC1737 PISTON RING COMPRESSOR 6"X175MM
  • Self locking ratchet pawl prevents premature release and allows positive locking action.
  • • 6” height, capacity 3-1/2” to 7” (90-175mm)
RM135.00
  • JTC1814 TORQUE ANGLE GAUGE
  • Measures angle of rotation after pre-torque load in torque-angle applications.
  • • 360 degree scale clearly marked in 2 degree increments & in intervals of 10 & 30.
  • • Easily zero the gauge by turning housing for next application.
RM122.00
  • JTC1820 AUTOMOTIVE VACUUM TEST KIT
  • This kit includes: Repairable Metal Vacuum Pump, Reservoir Jar, Transfer Lid, Storage Lid, 4 lengths of 1/4” ID Tubing, 1 length of 5/32” ID Tubing, Automotive Adapter Package, Brake Bleeding, Adapter Package, Rubber Cup Adapter, Fitted Carrying Case.
RM481.00
  • JTC1904N VALVE ADJUSTING TOOLS
  • For overhead camshaft engines using spacer shims.
  • • This unique tool has been designed to allow for easy valve adjustment on all NISSAN’S, and 
  •    many other overhead camshaft engines using spacer shims for valve adjustment in operation
RM265.00
  • JTC1904T VALVE ADJUSTING TOOLS
  • For overhead camshaft engines using spacer shims.
  • • This unique tool has been designed to allow for easy valve adjustment on all TOYOTA’S 
  •    LEXUS and many other overhead camshaft engines using spacer shims for valve 
  •    adjustment in operation.
RM255.00
  • JTC1921 MECHANIC STETHOSCOPE
  • • Locates source of engine noise quickly.
  • • Listen for trouble by tracing sound of flowing water, oil, gas or steam.
  • • Handle is shockproof.
RM51.00
  • JTC1936 1/2" x M9 CYLINDER HEAD BOLT TOOL
  • The 100mm length allows easy access to recessed head bolts.
  • • Comes with 1/2” drive for use with a torque wrench.
  • • Use for TOYOTA Tercel cylinder head bolt.
RM42.00