GTM-PBS9DQC Fluid Exchanger
Hand Tools
Welcome to www.hand-tools.com.my & www.amatrix.com.my
Fluid Exchanger
Sort by
Show result
  • A Portable oil extractor is a device which is used to remove the oil from a vehicle's engine without the need for getting under the vehicle to remove the oil drain plug.
  • Portable oil extractors consist of a flexible tube which can be inserted into the engine, a pump for drawing out the oil, and a reservoir for holding the oil. Some portable oil extractors come without a reservoir in which case a separate container must be used.
  • Portable oil extraction units are often used to remove the oil from inboard boat engines where there is limited space underneath the engine.
  • Equiped with a tool plate.In order to get the best working condition and we recommend draining below 70-80 degree.
RM1,250.00
  • Use your air compressor and this oil drain to easily transfer the used oil from the built-in tank to your own secondary container for effortless recycling at any height. Height adjusts for draining fluids from vehicles on lifts. Standard shop air pressure is sufficient to quickly empty used fluids from the storage tank.
RM650.00
  • JTC1033 HAND OPERATED OIL PUMP
  • • With reservoir capacity 20L
  • • It is suitable for general lubricant and gear oil.
RM758.00
  • JTC1045 HAND OPERATED FLUID EXTRACTOR (6.5L)
  • Capacity:6.5L
  • By manpower to push and create vacuum pressure for extracting fluid in any space.
  • Special patented design for releasing the pressure.
  • With extra tube storage.
  • Heat-resistance Temperature: 60℃
RM488.00
  • JTC1050 PNEUMATIC & HAND OPERATED FLUID EXTRACTOR (10L)
  • Capacity:10L
  • Pneumatic & manual operation fluid extractor of non-sparkle. 
  • Three air outlets with check valve design for quick & easy 
  •     to exhaust the air from the extractor.
  • Easy to operate suitable for engine oil, gear oil, break fluid, water…
  • Provide with new design decompression valve for easy to release
  •    the negative pressure.
RM807.00
  • JTC4328 PLASTIC HAND OPERATED OIL PUMP
  • Tank material: PE; Lid material PP.
  • Capacity: 30L
  • Deliver rate: 75cc/cycle.
RM666.00
  • JTC4632 PNUEMATIC OIL FILLING MACHINE
  • • Enlarged 45mm oil filler hole for easier to refill oil.           
  • • With oil dispensing gun to easily control the oil filling rate.           
  • • With a  dehumidify valve to filter the water from the air compressor.           
  • • Compressed air could be stored in the tank and use for filling oil at any place.           
  • • A clock or digital meter can be attached to measure the volume of the refilled oil.(optional part)           
  • • Capacity: 25L   
RM1,343.00
  • JTC4633 VACUUM & PNEUMATIC OIL FILLING MACHINE
  •  
  • • With vacuum ejector to get the fresh oil from heavy tank easily.           
  • • Filling rate controlled by air pressure and easily adjustable.           
  • • Compressed air could be stored in the tank and use for filling oil at any place.           
  • • With oil dispensing gun to easily control the oil filling rate.           
  • • A clock or digital meter can be attached to measure the volume of the refilled oil.(optional part)           
  • • Suitable for use in filling engine oil, lubricant, transmission oil, gear oil, gasoline, diesel, and neutral oil etc…           
  • • Perfect for automotive service garage, either performing or filling large quantity of fluid in vehicle.           
  • • Capacity: 80L
RM2,228.00
  • Capacity : 7 Liter
  • Simple and easy to operate, suitable for engine oil, gear oil, transmission and brake fluid water.
  • Non-spark power oil extractor.
  • Only operated by one man, clear operation. Save manpower.
  • Quick and safe.
RM520.00

 Hand operated grease pump (30L) 

RM899.00
  • Place withdrawal probe in dipstick tube and begin pumping. When unit is filled to capacity internal float shuts off preventing overfilling.
  • Pressure relief valve allows handle to return to carrying position for ease of transportation.
  • Pouring spout allows for clean transfer at a proper disposal facility making recycling easy.
  • Manual / Pneumatic Fluid Extracting
  • Capacity: 6.0 Liter
  • Suitable also for low viscosity fluids
  • Expert Quality, ideal for one person operation.
  • For the extraction of oils from motor vehicles, motor bikes, marine engines, gearboxes, generators etc.
  • without the removal of the oil drain plug.
  • Easily operated by using either hand pump action or compressed air supply.
  • Supplied complete with 1.5M of suction tube and three extraction straws (Air Hose not Included)
  • Suitable also for low viscosity fluids
RM450.00
  • Fluid Changer c/w standard accessories.
  • Technical Specification :
  • Function : Doual motors,Two Directional.
  • ( One System for ATF Change,Second System for
  • Engine Oil Change )
  • Feature : Circulate,Filter,Exchange,Suction Oil
  • Capacity : Old Fluid and New Total 20L
  • Weight : 55 kg
  • Dimensions : 610 X 565 X 900 mm
  • Oil Outpour : 3 - 4 L
  • Power requirements : 240V / 50HZ / 1PH
  • Pump : Gear Pump
RM4,600.00
  • Function : Doual motors,Two Directional.

  • ( One System for ATF Change,Second System for

  • Engine Oil Change )

  • Feature : Circulate,Filter,Exchange,Suction Oil

  • Capacity : Old Fluid and New Total 20L

  • Weight : 55 kg

  • Dimensions : 610 X 565 X 900 mm

  • Oil Outpour : 3 - 4 L

  • Power requirements : 240V / 50HZ / 1PH

  • Pump : Gear Pump

RM4,600.00
  • Total volume capacity 90 litre
  • Equipped with a tool plate with a show and can be cleaned
  • Equipped with transparent measure cup
  • Extractor Volume < 70 litre
  • In order to get the best working condition, we recommend draining below 70-80 Celsius
  • Diameter of probe is 6 mm
  • Suction Rate 1.5-2 L/min
  • Max Depression 0.5 Bar
  • Extraction Hose 2 mtr
  • Weight 42 kg
  • Warranty 6 months
RM1,200.00