- .3 ton (6,000 lbs) load capacity
- .200 degree turning radius allows room to maneuver in tight quarters
- .Articulating 7 in. poly-over-aluminum steer wheels ensure continual contact with uneven floors
- .One-piece cast pump features high quality seals, hardened and chrome plated ram and piston, top-of-stroke and overload safety bypass valves
- .Smooth, special lowering valve for controlled descent
- .Single point valve replacement for quick and easy rebuild
- .Rounded fork tips with nylon guide rollers for trouble-free pallet entry and exit
- .Solid steel push rods never need adjustment
- .Wheel bearings are double sealed and lifetime lubricated
- .Ideal for warehouse, supermarkets, distribution centers, factories, stockrooms, storage facilities and loading docks
- .Engineered to provide years of trouble-free service even under toughest working conditions
- Smoke Silver Mirror lens
- Incredibly light 23 grams
- Anti Scratch
- Anti UV
- Impact resistant
- Anti Fog
- Comply to ANSI Z87.1 & EN 166
- Strong blowing power
- Silver coated mesh
- Operation - Maximum 12 hours
- If operate more than 12 hours,have 30 minuted interval to extend the usage life.
- 3 months warranty on motor* (Term & Condition Applied)
- Size: 18"
- V220-240
- Phase single
- Hz60
- W1500
- r/min: 2800
- m3/min162
- dB(A)83
- (Pa) 3972
- MOTOR FLUSH
- Cleans Engines in 3 Minutes
- Easy to use! Add to oil before changing
- Removes power-robbing deposits
- Dissolves gum, sludge & varnish
- Helps free sticking valve lifters & rings
- 18V XR Li-Ion compact drill driver featuring XR 1.3Ah Li-Ion battery technology.
- 13 mm single sleeve chuck and spindle lock for quick and easy bit change with one hand.
- Two speed settings, variable speed and reverse switch for maximum control.
- Intelligent trigger design allows for total control of application.
- 16 Position adjustable torque control for consistent screw driving into a variety of materials with different screw sizes.
- Drill Driver and Hammer settings for multiple applications.
- Bright white LED with delay feature for improved visibility and flashlight functionality.
- Improved ergonomic design and rubber grip increases user comfort.
- Multi-voltage charger for all XR Li-Ion slide pack batteries.
- Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster.
- E-MARK 65026 24 pcs Ratchet Socket Set (CR-V Steel)
- 12-point
- Contents:
- 18 Pcs Sockets : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm
- 125mm, 250mm Extention Bar
- Sliding T-Bar
- Universal Joint
- Spark Plug Socket
- 72 teeth ratchet
- ELSEC Insulating Glove
- Available Voltage : 5KV, 10KV, 20KV & 30KV
- Made to obtain high dielectric properties
- Have ergonomic shape and are made from high quality natural latex using fully automated production line
- Lenght : 360mm
- Replacement Cylinder Visor - Green
- Material : Polycarbonate Accessories
- Available : A2, A3, A4, VH4-CE, EVH-1, BGVH
- Comply to EN166-1 B & ANSI Z87-1
• No pick up when generator is killed.
• Prevent form Audio lock up or Computer down when changing the car battery.
• Power supplier for home electric appliances.
• Emergency power supply.
• Easy and quick charge.
• Size:320 x 85 x 240mm
• Weight:9kgs
- Designed for fast ewmoving the upholstery clips
- Place the tool under the edge of door panel & insert in fastener then pry up
- Front Width:7mm :Total Length:240mm
- Material:carbon steel blade with PP hanle.
• Designed to meet IEC 61010-1 CAT III 600V
• Test leads with remote control switch.
(For insulation&Simplified Earth Test)
• Back light function.
• Color coded scales and range switch position for easy reading.
• Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.
• Can be hung around the neck for both hand’s operation.
• Digital Phase Indicator with open phase checker.
• Phase indicator designed to check the presence of open phase and also the phase sequence by LED and buzzer at the same time.
• Small, lightweight, and portable.
- Economic Welding Head Shield
- Material : Thermoplastic
- Lifting Support Belt / Back Support
- Helps to reduce lower back discomfort & repetitive back strain
- Velcro closure for easy open & close
- SELLERY 31-510 WALL STRIPPER 4” x 12”
- Applications: for stripping & removing wall paper, paint & varnish
- Automatically maximizes battery life and performance with a built-in battery health mode
- Hybrid LED battery charging gauge with LCD display
- DXT - Deep and Exact Cutting Technology Deep cutting - 3 stage reduction gear unit and movable rear blade guard provide larger capacities of cutting crown molding or skirting board.
- Capable of diagonal cutting up to 203mm in crown molding.
- Capable of vertical cutting up to 165mm in baseboard (skirting).
- Exact cutting is obtained by using 4 short poles instead of the usual 2 longer poles. This also reduces vibration and makes for more precise cutting.
- 6 linear ball bearings are used to support the 4 poles for smooth and precise sliding out.
- Double sliding guide fence - the upper and the lower sections slide independently for added convenience; each upper fence slides outwards for bevel cut and each lower fence slides inwards to securely hold small workpieces for precise and exact cutting.
- Quick and accurate mitre angle lock - mitre angle can be locked or unlocked by simply turning the handle 90°.
- Positive stops at 0°, 15°, 22.5°, 31.6° and 45°.
- Universal saddle,brackets and chain sling are fully adjustable to accommodate transmission, clutches and differentials in varying sizes.
- . Pump handle rotates 360 degree for convenient operation.
- . Four swivel casters allow for easy to position under the vehicle
- . Low frame design gets under the lowest clearance trucks, making it ideal for clutches repair work
- . Easily accessible release knob facilitates sensitive load lowering
- . Safety overload system prevents the re, form being over extended and beyond it's reated capacity.
- Super Joint System (SJS)
- Heavy duty motor.
- Residual cuttent device for safe operation.
- Variable speed control.
- One touch hose joint.
- 4 water supply holes on spindle end.
- Cover prevents water splashes.
- Model: SHT-30 (Included 300mm x 5meter flexible hose)
- Single phase 220~240V.
- Large capacity motor with E-class, long endrance
- Specially designed axial propellers
- High static pressure,high flow rate and excellent strength
- Ventilation for mini, underground, drainage workshop
- Gas exhaust dust blowing
- Fresh air
- Satin Chrome Finished
- Bit holder rail swivel upwards for easy access
- EVA form + PP inner tool tray
- Robust, high quality and light weight ABS+TPU material plastic storage tool box
- PLASTIC BOX: W172 x D105 x H48 (mm)
- A Portable oil extractor is a device which is used to remove the oil from a vehicle's engine without the need for getting under the vehicle to remove the oil drain plug.
- Portable oil extractors consist of a flexible tube which can be inserted into the engine, a pump for drawing out the oil, and a reservoir for holding the oil. Some portable oil extractors come without a reservoir in which case a separate container must be used.
- Portable oil extraction units are often used to remove the oil from inboard boat engines where there is limited space underneath the engine.
- Equiped with a tool plate.In order to get the best working condition and we recommend draining below 70-80 degree.
- Clear lens
- Incredibly light 42 grams
- Blue Temples
- Anti Fog
- Impact resistant
- Comply to ANSI Z87.1 & EN 166
- Welding Leather Jacket
- Made of quality cow grain leather with two vertical level buttons for adjustable sizes
- Excellent body protection against heat, welding sparks & harmful welding rays
- * This padlock range offers general security for outdoor conditions.
- * They can be applied to gates, garages, shutters and shed doors.
- * These padlocks' unique satin chrome plated finish and Boron shackle increases resistance to attack.
- * Double locking shackle.
- * Self-latching mechanism.
* This padlock range offers general security for outdoor conditions.
* They can be applied to gates, garages, shutters and shed doors.
* These padlocks' unique satin chrome plated finish and Boron shackle increases resistance to attack.
* Double locking shackle.
* Self-latching mechanism.
- Drop-forged, heat treated steel body
- For automotive and industrial use
- Fits in brake caliper to push back pistons for new brake pads installation
- Essential tool for retracting the brake piston to allow insertion of new brake pads
- Max Height : 1800mm
- Min Height : 870mm
- Capacity : 500 kg
Model X5ET0.5EE
**Features**
.Design for removal, installation and transportation of transmission and transfer cases on passenger cars, vans and light trucks that are raised by an in ground lift
.Supplied with chain for safe loading
.Precision valve allows delicate adjustment when taking out gearbox and realigning during replacement
.Four castors for extra manoeuvrability in confined spaces
.Low frame design gets under the lowest clearance trucks, making it ideal for clutches repair work
**Specifications**
Model X5ET0.5EE
Lifting weight 0.5 ton
Min. height 170 mm
Max. height 680 mm
Net weight 45 kg
Packing 86 x 44 x 22 cm
Warranty 6 months
- Formulated with Diminishing Abrasives
- Safely removes light scratches/swirls
- Super-fine particles breakdown from friction to gently buff away any surface blemishes
- Safe for all finishes
- For hand or machine use
- Professional Formula.
- Removes light scratches and abrasions.
- Safe for clear coats.
- Simply Apply to vehicle, rub in circular motion, and wipe away!
- 1 Ton Wide Fork Hard Pallet Truck AC-1000ULP
- Ergonomic large rubber handle with three control level
- Galvanized housing,sturdy construction with rugged chrome piston
- Single valve cartridge instead of many individual parts,easy for service and repairs purpose
- Full Hydraulic system.Bullet connection between steering pump and piston pump
- Special lowering valve to control the rate of descent
- Overload by-pass valve to make the trucks durable
- Reliable oil leak - proof hydraulic system
- Optional : Polyurethane wheel,Nylon wheel and Steel wheel for steering and load wheel
- Powerful 5.5 amp motor provides a smooth, even finish in the hardest of woods
- 34,000 cuts per minute achieve a fast removal rate
- 1/16" (1.5mm) maximum depth of cut
- Includes industry-standard large, resharpenable high speed steel blades for straight edging or framing applications
- Also accepts reversible carbide blades for improved blade life and material finish
- Calibrated depth adjustment knob to 1/16" (1.5mm approximately)
- Precision-machined front and back aluminum shoes ensure parallelism of cut
- Kickstand allows user to rest the planer on work surface without gouging the material
- Precision machined groove in front shoe allows for edge chamfering
- Poly-V drive belt provides increased belt durability
- Ergonomically designed handle provides greater comfort and less user fatigue
- Polyamide Lanyard
- Rope size is 12mm dia
- 1.6M-LH - 1.6M
- 2.0M-LH - 2M
- Conform to BS EN 354 & Sirim certification No : PPO71005
- Polyamide Lanyard
- Rope size is 12mm dia
- 1.6M - SH - 1.6M
- 2.0M - SH - 2M
- Conform to BS EN 354 & Sirim certification No : PPO71005
- Free speed:160 rpm
- Max torque:100nm
- Air inlet:1/4"
- Air consumption:200 L / min
- Net weight:1.2kg
- Overall length:230mm
- Planet gear mechanism:2Gear
- Exhaust system:Rear
- Drop-forged, heat treated steel jaw
- Hardened and tempered, precision machined center bolt
- Sliding T – bar handle applies even force
- Black oxide finished for durability
- 3 jaw design for greater leverage and easy pulling
- Removes all sleeve type bearing with 1/2” – 2” inside diameter
- 1/2” 6 Point Standard Sockets - Metric
- Made of chrome vanadium steel.
- Chromed finish for exceptional resistance to rust.
- MaxiDrive gripping system:rounded gripping surface allows for 15% more torque and avoids rouding off fasteners,providing higher tenacity.
- 2.3 AMP motor sands at 14,000 OPM
- Rubber overmold texture will provide smooth and comfortable control while sanding
- Improved paper clamp features for better paper retention
- Locking dust-port system that allows the user to lock vacuum hose up with the sander
- Reduced overall height of the sander to get the user closer to their work
- Separate counterweight design reduces vibration
- Rubber dust boot over the swtich to protect against dust ingestion for longer switch life
- Dust port is designed to fit directly to the DWV010 or DWV012 dust collectors
- To attach dust port to other vacs with 1 1/4" hoses use DWV9000 universal quick connector
Capacity 10L | |
Overall Depth 195 | |
Overall Length 319 | |
Overall Weight 0.82 | |
Overall Width 329 | |
Weight Each 900g |
- Chrome plated steel screw with swivel pad
- Heat treated steel bar
- Hardwood screw handle
- Use for a firm hold on your metal fabricating or woodworking projects
- Power:750W/240V
- Speed: 2950rpm/50Hz
- Wheel Size:250x25x32mm
- 100% Copper
- Permanently Lubricated Motor Bearings for Long Life
- Adjustable Eye Shield and Spark Guards
- Removable Wheel Guards For Easy Wheel Changing
- Adjustable Tool Rests
- 10" PP Fibre Refill (1micron) GEN AIR GA5 3 PIECE
- Reduces scale,mud,silt, rust and sand particles
- Fine fibres are self-bonded in hot-melt form and never fall off
- 3 dimensional pores in 2 tier structure
- High dirt-holding capacity
- Recommended for use at incoming water main
- Charges DEWALT 10.8V Li-Ion batteries
- Charges 1.3Ah battery pack in 40 minutes
- DEWALT 2 stage charging system
- Diagnostics with LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold
- 680W, 10,000rpm provides high power and speed for 100mm grinding applications
- Advanced fan system provides maximum airflow prolonging motor life
- Sealed toggle switch provides protection from dust and fillings, extending switch life
- Spindle lock for quic and easy disc change
- Compact gear case allows use in tight and confined areas
- Accessible brushes for easy brush replacement and less downtime
- 100mm small angle grinder
- Special plastic glue layer to protect against desert metal stator
- Body compact hand held peasant feeling
- Fast cooling system for added durability
- Run fast, powerful
- Rotor dustproof protection
- 850 watts of powerful motor with 64% increase of operating capacity.
- Slim and compact design provides comfortable handling.
- Cut-off brushes to prolong motor life.
- Model EP1200
- Frequency 50Hz
- Power Factor 1.0
- Rated AC Output 900W
- Max. AC Output 1000W
- AC Output Voltage 240V
- Noise Level LwA 89dB(A)
- Engine Type 4-Stroke, air cooled, single cylinder
- Displacement 98cc
- Continuous Operating Time (50% - 7 hour) (100% - 4 hour)
- Starting System Recoil
- Net Weight 21.5kg
- Gross Weight 24kg
- Dimension L435 x W315 x H365mm
- Warranty 6 months
- 100kg
- Top working surface area: 410mmX140mm
- Whole dimension: 700mmLx270mmWx310mmH
CODE |
BLADE (M / FT) x (MM) |
W (MM) |
H (MM) |
D (MM) |
|
|
64- AA100 |
100 / 330 |
13 |
330 |
410 |
25 |
- 850 watts of powerful motor with 64% increase of operating capacity.
- Slim and compact design provides comfortable handling.
- Cut-off brushes to prolong motor life.
- The fast, easy cleaner-polisher & rust remover
- Cleans & polishes in one operation
- Bright mirror shine for chrome bumpers & trim
- Removes traffic film, bug residue & rust stains quickly & easily
- Excellent for polishing nickel, brass, copper & stainless steel
- Plasma arc welding (PAW) is an arc welding process similar to but more advance than the gas tungsten arc welding(GTAW) type. This process uses a non-consumable tungsten electrode and an arc constricted through a fine-bore copper nozzle. By positioning the electrode within the body of the torch, the plasma arc created can be seperated from the shielding gas envelope and forced through the nozzle at temperature to as high as 11,000°C. PAW can be used for most commercial metals and alloys.
- Advanced Stable Digital Control System
- Provides various adjustable parameters
- Strong hot start
- Smart Dimension and light for carry
- Air filter and regulator integrated
- working surface area: 150mmX80mm
- Whole dimension: 260mmLx100mmWx150mmH
- SHOCKS - Active Vibration Control® Reduces vibration felt by the user at the handles . A Perform and Protect feature.
- 14.0 Amp motor provides high performance and overload protection
- Non-air pumping beatpiece eliminates masonry dust from entering the unit extending tool and seal life
- Spring-loaded dust seals ensure longer tool life
- - Variable impact control dial (19 settings) ensures accurate impact energy depending on the application
- - Large on/off rocker switch allows for easy single finger operation
- - One-step chisel rotation (12 positions) allows the user to quickly and accurately adjust the chisel, not the tool
- - Variable position side handle allows 360° rotation and 150° adjustment for ease of use
- - In-line design for easy operation of tool in horizontal or vertical applications
- - SDS max tool holder with rubber dampers absorbs energy providing longer life
INNER D (MM) (INCH) |
OUTER D (MM) |
LENGTH (M) |
|
|
10 |
3/8 |
16 |
100 |
|