GTM-PBS9DQC Makita
Hand Tools
Welcome to www.hand-tools.com.my & www.amatrix.com.my
Makita
Makita
Sort by
Show result
  • DXT - Deep and Exact Cutting Technology Deep cutting - 3 stage reduction gear unit and movable rear blade guard provide larger capacities of cutting crown molding or skirting board.
  • Capable of diagonal cutting up to 203mm in crown molding.
  • Capable of vertical cutting up to 165mm in baseboard (skirting).
  • Exact cutting is obtained by using 4 short poles instead of the usual 2 longer poles. This also reduces vibration and makes for more precise cutting.
  • 6 linear ball bearings are used to support the 4 poles for smooth and precise sliding out.
  • Double sliding guide fence - the upper and the lower sections slide independently for added convenience; each upper fence slides outwards for bevel cut and each lower fence slides inwards to securely hold small workpieces for precise and exact cutting.
  • Quick and accurate mitre angle lock - mitre angle can be locked or unlocked by simply turning the handle 90°.
  • Positive stops at 0°, 15°, 22.5°, 31.6° and 45°.
RM3,572.00
  • Super Joint System (SJS)
  • Heavy duty motor.
  • Residual cuttent device for safe operation.
  • Variable speed control.
  • One touch hose joint.
  • 4 water supply holes on spindle end.
  • Cover prevents water splashes.
RM1,842.00
  • Only 66mm (2-5/8") in head height.
  • DA3010F : Features a built-in LED job light.
  • With keyed chuck.
RM893.00
  • Labyrinth construction protects all ball bearings from dust and debris.
  • Small circumference barrel grip for easy handling.
  • Shaft lock for easy wheel changes.
  • Easier repairing of gear section assembled with key.
RM244.00
  • Small and rotatable gear housing.
  • Large trigger switch.
  • Lightweight.
RM498.00
  • Increased heat resistance.
  • Superior anti-dust structure.
  • Machined bevel gear for strength.
  • Soft grip for more comfort and control.
  • Gear housing can be positioned at every 90 degrees.
RM498.00


Continuous Rating Input      2000 w
Capacity    Depressed Center Wheel : 230mm (9")
Wire Cup Brush : 110mm (4-3/8")
Cut-off Wheel : 230mm (9")
No Load Speed    6600 rpm
Dimensions (L x W x H)    432mm x 250mm x 132mm
Net Weight    4.7kg
Power Supply Cord    2.5m

RM526.00
  • Increased heat resistance.
  • Superior anti-dust structure.
  • Machined bevel gear for strength.
  • Soft grip for more comfort and control.
  • Gear housing can be positioned at every 90 degrees.
RM600.00
  • Labyrinth construction protects all ball bearings from dust and debris.
  • Small circumference barrel grip for easy handling.
  • Shaft lock for easy wheel changes.
  • Easier repairing of gear section assembled with key.
RM263.00
  • Powerful motor delivers more output for increased performance
  • Gear housing rotates 90° for operator convenience
  • Refined Design at only 2.2kg (4.8 lbs)
  • Labyrinth construction seals the motor from dust and debris by creating a complex set of channels prohibiting contamination
  • Externally accessible brushes for greater serviceability
  • Soft Grip for more comfort and control
  • Ideal for welders, fabricators, Masons, Maint/Repair etc.
RM395.00
Depressed Center Wheel   125mm (5")
Wire Cup Brush 90mm (3-1/2")
Avrasive Disc 125mm (5")
Diamond Wheel 125mm (5")
Input 1050W
No Laod Speed 11,000rpm
Overall Length 256mm (14")
Net Weight 2.5kg
Power Supply Cord 2.0m
 
RM451.00
  • Soft start function minimizes the startup shock.
  • Super Joint System - SJS : Ensures smooth and comfortable cutting work, helps prevent kickback and gear damage caused by accidental wheel binding.
  • Dust cover porotects the operator's hands from flying dust and chips.
RM2,633.00
  • 80 minutes continuous use.
  • Compact and light weight.
  • 4-stroke efficient engine, lowest emission.
  • 76mL displacement, yet easy to start.
RM2,980.00
  • DC10WA is a 240v input battery charger suitable for Makita 7.2v - 10.8v Li-ion Batteries. 
  • Charger time approx 50 minutes for 10.8v - 1.3Ah battery
RM160.00
  • Belt speed can be adjusted for sanding a wide variety of materials.
  • Lightweight at only 2.1kg.
  • Multi-position side handle for easy and comfortable operation.
  • Lock-on button for continuous operation.
RM1,128.00
  • Powerful 7.8 motor for fast material removal
  • Extended base to allow flush sanding
  • Innovative design for sanding flush to wall with nose and side of sander
  • Extra long cord for easier maneuverability
  • Easy-release belt lever for quick belt changes
  • All-ball bearing construction for longer tool life
  • Replaceable ceramic wear plate for easy maintenance
  • Low profile for balance and less gouging
  • Highly efficient dust collector
  • Double insulated
RM1,278.00
  • Unique design allows flush sanding to edges with side of sander.
  • With perfect balance, low noise and a high dust collection capacity, this machine is the tool to have if you need a professional sander to make short work of large sanding tasks.
  • The electronic speed dial allows you to match the rate of sanding to individual jobs for added control.
  • Without any adjustment the sanding belt centres itself on rollers when in operation.
  • Constant speed under load.
  • Double insulated.
  • High dust collecting capacity.
  • Low noise at 85dB.
RM1,307.00
  • 2 bulbs ease your grinding jobs.
RM452.00
  • Cosmetic new design.
  • Balance weight installed.
  • 2 bulbs ease your grinding jobs.
RM770.00
  • Variable Speed For Desired Application
  • Electronic Speed Control Maintains Speed Under Load
  • Soft Start Feature For Smooth Start-Up
  • Two Speed Selection Button: Low (600 RPM) And Variable (600-1,200 RPM)
  • Trigger Lock-On Button For Convenience
  • Well Balanced For Maximum Control And Reduced Operator Fatigue
  • Motor-Over-Pad Design For Better Balance And Control
RM893.00
  • Ideal for cutting large dimensional lumber cleanly and accurately in a single pass.

 

RM1,645.00
  • Huge cutting capacity with efficient control.
  • Sturdy, rugged performer.
RM1,928.00
  • The biggest portable ever.
  • Yet, surprisingly light at 14kg for easy operation.
  • Cuts 157mm at 90 degrees and 106mm at 45 degrees
RM2,050.00
  • Aluminum die cast safety cover. 
  • Flat motor housing design; increases stability when changing blades. 
  • Soft grip provides more comfort. 
  • Aluminium base plate. 
  • Single action lever for quick adjustment of cutting depth and bevel angle.
RM499.00
  • Powerful 1050W motor for smooth operation even in heavy-duty cutting.
  • Well balanced body and ergonomically designed handle for comfortable operation.
RM499.00
  • Powerful 1200W motor deliver 5,200 RPM for performance and job site durability. 
  • Large cutting capacity (2-1/2” at 90°, 1-5/8” at 45°). 
  • Well-balanced and lightweight (3.9kg) for superior handling and performance. 
  • Lower guard design improves performance when making bevel and narrow cuts. 
  • Heavy gauge aluminum wraparound base engineered for improved durability and straighter cuts. 
  • Bevel cuts 0°-45° for the most common cutting applications. 
  • Large and easy-to-read markings on base for more precise cutting. 
  • Flat motor housing design for stability when changing the blade. 
  • Ergonomic rubberized front grip and handle provided added comfort. 
  • Conveniently located shaft and lock for easy blade replacement. 
  • Blade wrench stores on the saw for convenient blade changes Ideal for framers, roofers, carpenters and general contractors.
RM499.00
  • Lightweight thanks to using sturdy magnesium die cast for base and blade case.
  • Ergonomically designed handle with rubberized soft grip provides more control and comfort.
  • Max. bevel capacity : 50 degrees.
  • Rubberized levers.
RM649.00
  • Bevel cuts up to 50 degrees.
  • Flat-end motorhousing for easy blade changes.
RM593.00
  • Capable of planing flush to corners.
  • Powerful 1400w motor provides efficient planing operation.
  • Anti-restart function is provided.
  • Electrical current limiter protects motor from overload.
RM2,305.00
  • Capable of planing flush to corners.
  • Powerful 1400w motor provides efficient planing operation.
  • Anti-restart function is provided.
  • Electrical current limiter protects motor from overload.
RM1,380.00
  • The head height of 53mm ensures easy access to screws in tight places.
  • Conveniently located reverse switch.
  • Ergonomically designed handle with rubberised soft grip provides more control and comfort.
  • LED job light with afterglow function.
RM780.00
  • BL: Brushless motor: provides more energy and power generating a max 1700rpm no load speed.
  • Hepa Filter: It is used as the main filter to capture very fine particles effectively. It is able to capture 99.97% of particles as small as 0.3-1 micrometer.
  • Exhaust air is as clean as that of air cleaner.
  • Comfortable harness: Featuring shoulder and waist belts adjustable to suit user's size for less fatigue even after long continuous operation.
  • LED Job Light
  • Controller: To control the High/Low power.
RM1,298.00
  • BL : Brushless motor. Powered by two 18V Li-ion batteries in series to supply energy to the powerful. 36V DC motor drive system
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
  • Dual battery fuel gauge. 
  • High air volume and speed delivered by brushless motor. 
  • Longer run time thanks to brushless motor. 
  • 6-stage air volume/velocity settings by dial with variable speed control by trigger. 
  • Lock on function, with button operable from either side of handle. 
  • 3-stage telescopic long nozzle with adjustment range of 100mm. 
  • Soft start. 
  • Constant speed control. 
  • Best grip to frame angle provides optimum nozzle to ground angle for efficient sweeping operation. 
  • Lightweight & compact for single handed operation. 
  • Low noise emissions.
RM1,645.00
  • BL : Brushless motor. Powered by two 18V Li-ion batteries in series to supply energy to the powerful. 36V DC motor drive system
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
  • Dual battery fuel gauge. 
  • High air volume and speed delivered by brushless motor. 
  • Longer run time thanks to brushless motor. 
  • 6-stage air volume/velocity settings by dial with variable speed control by trigger. 
  • Lock on function, with button operable from either side of handle. 
  • 3-stage telescopic long nozzle with adjustment range of 100mm. 
  • Soft start. 
  • Constant speed control. 
  • Best grip to frame angle provides optimum nozzle to ground angle for efficient sweeping operation. 
  • Lightweight & compact for single handed operation. 
  • Low noise emissions.
RM2,350.00
Chain Speed per minute 500m
Guide Bar Length 10"
Chain Blade 3/8" Pitch
Dimensions (L x W x H) 545mm x 234mm x 198mm
Weight with 2 battery 1830 4.6kg
RM1,975.00
  • Large lock-off lever easy to operate with gloved hand.
  • Twin LED light illuminates blade edge for accuratecutting even in dark place.
  • The air directed from the end of the top guide blows sawdust off the cut line ahead.
RM649.00
Max. Cutting Capacity  at 0 degree: 25.5mm (1")
at 45 degree: 16.5mm (5/8")
Blade Diameter 85mm (3-3/8")
No Load Speed 1400 rpm
Dimensions (L x W x H)  300mm x 170mm x 154mm
Weight of Machine 1.5 kg
RM555.00
  • Slide type Li-ion battery. 
  • Ergonomic soft grip. 
  • Blower function - blows sawdust off the line cut. 
  • Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. 
  • High power - cutting efficiency higher than HS300D. 
  • Depth of cut adjustable up to 25.5mm. 
  • Base plate bevels up to 45° for angled cuts. 
  • Dust extraction port on top of the machine. 
  • Spindle lock and hex key onboard for easy blade changes
RM705.00
  • Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system.
  • Compact and lightweight design.
  • Rear dust exhaust port.
  • Same depth of cut as HS7100.
  • Durable but lightweight magnesium die-cast blade case and safety cover.
  • Blower function to clear wood dust from cutting line.
RM1,692.00
Tank Capacity 250mL
Maximum Air Flow  1300L/min
Continuous Using Time  High : 12 minutes with 18V x 3.0Ah Battery
Low : 30 minutes with 18V x 3.0Ah Battery
Maximum Sealed Suction  6.6kPa
Dimensions (L x W x H) 352mm x 189mm x 252mm
Weight 4kg
RM1,035.00
RM1,250.00
  • Ergonomically designed, easy to grip, slim body for grinding in tight spots
  • Internal labyrinth construction seals motor and bearings from contamination
RM489.00
  • Ergonomically designed, easy to grip, slim body for grinding in tight spots
  • Internal labyrinth construction seals motor and bearings from contamination
RM498.00
  • FeaturesThe Makita DDF083Z 18v Lithium-ion 2 Speed Brushless Drill Driver's motor provides up to 50% more runtime, increased power, speed and overall tool life. 
  • BL: Brushless motor: provides more energy and power generating a max 1700rpm no load speed.
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water. 
  • Impressive max 40Nm torque with 20+ torque settings. 
  • Featuring 2 speed/variable speed with forward/reverse rotation, 1/4" hex chuck capacity, 
  • Electric brake.
  • LED job light with pre-glow for use in low visibility applications. 
  • Variable speed trigger for greater control. 
  •  
  • 124mm compact overall length and lightweight 1.3kg design make it easy to handle. 
  • Ergonomically designed, soft rubber grip handle provides maximum user comfort reducing fatigue on prolonged use and greater tool control.
RM545.00
  • CXT: Compact eXtreme Technology.
    a) Multi-contact terminals to ensure stable contact even under extreme work vibration conditions.
    b) High level of structural strength as well as having built-in protection to prevent overload or over discharging.
  • Electric brake. 
  • Mechanical 2 speed transmission. 
  • 18 torque settings.
  • Variable speed control trigger. 
  • Keyless Chuck. 
  • Forward and reverse trigger. 
  • LED job light. 
  • Ergonomic soft grip. 
  • Belt clip.
RM423.00
Max. Pressure 0.3Mpa
Chemical Liquid Tank 15 L
Dimensions (L x W x H) 345mm x 235mm x 525mm
Weight 4.1kg
Voltage 18 V
RM2,050.00
  • Compact design with an overall length of 300mm 
  • Rubberized soft grip with non-slip elastomer grip for more control and comfort 
  • Lithium-ion battery, lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery 
  • On-tool storage for hex wrench 
  • Lightweight at only 1.7kg 
  • High cutting capacity: 25.5mm max. cut depth at 0° 
  • Nickel-plated base for rust prevention 
  • Smooth and powerful cutting at the high rotational speed of 1,400RPM 
  • Water supply tank with large cap for easy opening and refilling water
RM583.00
  • Water supply tank with large cap for easy opening and refilling of water. 
  • Bevel cuts up to 45 degrees. 
  • Large easy-fill water supply bottle. 
  • High power. 
  • Designed for cutting glass and ceramic tile. 
  • Lock-off button for safe operation. 
  • Nickel plated base plate for rust prevention.
RM743.00
Cutting Width  260mm (10-1/4")
No Load Speed 7800 rpm
Battery Capacity 18 Volts
Dimensions (L x W x H)  1229~1433mm x 267mm x 257mm
Weight 3.1kg
RM498.00
  • BL: Brushless motor: provides more energy and power generating a max 1700rpm no load speed.
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
  • One touch sliding chuck for easy bit installation and removal.
  • LED job light.
  • Ergonomic soft grip.
  • Electric brake.
  • Variable speed control by trigger.
  • Forward/reverse rotation.
  • Compact overall length
RM1,270.00
RM1,590.00
  • CXT: Compact eXtreme Technology.
    a) Multi-contact terminals to ensure stable contact even under extreme work vibration conditions.
    b) High level of structural strength as well as having built-in protection to prevent overload or over discharging.
  • Slide type Li-ion battery 
  • Electric brake Variable speed control trigger.
  • Forward and reverse trigger. 
  • LED job light. 
  • Ergonomic soft grip.
RM545.00
  • BL: Brushless motor: provides more energy and power generating a max 1700rpm no load speed.
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
RM1,025.00
  • BL: Brushless motor: provides more energy and power generating a max 1700rpm no load speed.
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
  • 21 Torque settings
  • Electric brake
  • 2x Mechanical Gears
  • Variable Speed Trigger
  • Forward/Reverse Rotation
  • LED Job Light
  • Compact Overall Length of 182mm
  • Single Sleeve Keyless Chuck
  • Aluminium Gear Housing
  • All metal gear construction
  • Ergonomic Soft Grip
  • Brushless Motor
  • Belt Clip
RM1,410.00
  • BL: Brushless motor: provides more energy and power generating a max 1700rpm no load speed.
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
RM1,505.00
RM1,750.00
  • BL: Brushless motor: provides more energy and power generating a max 1700rpm no load speed.
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
  • Electric brake
  • 2x Mechanical Gears
  • Variable Speed Trigger
  • Forward/Reverse Rotation
  • LED Job Light
  • Compact Overall Length of 182mm
  • Single Sleeve Keyless Chuck
  • Aluminium Gear Housing
  • All metal gear construction
  • Ergonomic Soft Grip
  • Brushless Motor
  • Belt Clip
RM677.00
  • Electric brake 
  • Variable speed control trigger 
  • Forward/reverse rotation 
  • Battery protection circuit 
  • Ergonomically designed handle with rubberised soft grip fits your hand perfectly to provide maximum control and comfort
RM988.00
  • Weights only 1.7kg.
  • Phosphorescent bumper.
  • LED Job light with afterglow.
  • 1/2" square drive.
RM1,391.00
  • Weights only 1.7kg.
  • Phosphorescent bumper.
  • LED Job light with afterglow.
  • 1/2" square drive.
RM705.00
  • BL: Brushless motor: provides more energy and power generating a max 1700rpm no load speed.
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
  • Auto stop mode stops impact and rotation in 0.2 seconds after fastener is loosened (when trigger is fully depressed in reverse rotation)。 
  • Variable 3-Speed.
  • Reversible.
  • 3-Stage Impact Power Selection prevents fastener over-tightening.
  • Integrated LED work light with afterglow features an independent on/off switch. 
  • Comfortable, ergonomic, vibration-absorbing, soft rubber grip.
RM1,410.00
RM1,750.00
  • BL: Brushless motor: provides more energy and power generating a max 1700rpm no load speed.
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
  • Auto stop mode stops impact and rotation in 0.2 seconds after fastener is loosened (when trigger is fully depressed in reverse rotation)。 
  • Variable 3-Speed.
  • Reversible.
  • 3-Stage Impact Power Selection prevents fastener over-tightening.
  • Integrated LED work light with afterglow features an independent on/off switch. 
  • Comfortable, ergonomic, vibration-absorbing, soft rubber grip.
RM1,505.00
RM1,600.00
  • Compact design with an overall length of only 266mm. 
  • Powerful DC motor with replaceable carbon brush for economic repair and maintenance. 
  • Easy to operate, large rocker type switch. 
  • Large bumper, protects workpiece from scratches, increasing maneuverability. 
  • Unique rubber joint construction: 
    (a) Suppresses transmission of vibration to battery terminals 
    (b) Minimizes battery failures such as terminal breakage or poor electrical contact.
RM1,692.00
  • Small and compact, ideal for applications in tight spaces
  • Convenient push button to change forward and reverse for ease of operation
  • Ergonomically designed high comfort grip
  • LED job light for improved work visibility
  • Variable speed trigger control
  • Electronic brake
  • Lithium-ion battery, lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery
RM423.00
  • Compact and lightweight design achieved while maintaining the power enough to perform smooth light duty cutting.
  • Variable speed control by trigger.
  • Bevel Capacity: 0° to 45° left and right.
  • Change lever for 3 orbital settings and straight cutting.
  • Best possible ergonomic handle provides comfortable grip and more control while minimizing hand fatigue and pain.
  • Rigid aluminium base.
RM517.00
  • Low vibration and low noise
  • Toolless push-in lock system enables extremely quick blade changes
  • Rubber Dust Seal at Rod and Retainer shuts out dust
  • Large trigger seitch is easy to operate with gloved hand
  • Ergonomically designed handle with rubberized soft grip provides more control and comfort
RM752.00
RM950.00
  • Low vibration and low noise
  • Toolless push-in lock system enables extremely quick blade changes
  • Rubber Dust Seal at Rod and Retainer shuts out dust
  • Large trigger seitch is easy to operate with gloved hand
  • Ergonomically designed handle with rubberized soft grip provides more control and comfort
RM1,495.00
  • CXT: Compact eXtreme Technology.
  • Variable spped control by trigger.
  • Bevel capacity 0° to 45°.
  • With blower function.
  • Ergonomic handle.
  • Connectable to vacuum cleaner using option hose.
RM743.00
  • POWER : High-luminance single L.E.D. flashlight provides 160 lumens. 
  • PERFORMANCE : Up to 23 hours of continuous illumination from a 18V LXT® Lithium-Ion 5.0Ah battery. 
  • DURABILITY : Aluminum flashlight head design for increased durability. 
  • VERSATILITY : 12 position pivoting flashlight head with positive stops from 60º - 110º. 
RM235.00
Capacity Depressed center wheel: 100mm (4")
  Abrasive disc: 100mm (4")
  Diamond wheel: 100mm (4")
No Load Speed  8500 rpm
Dimensions (L x W x H)   362mm x 117mm x 140mm
Net Weight 2.4kg
RM742.00

Model: DUB182Z (No Battery and Charger is included.)
High/ Medium/ Low air volume settings.

 

Features

  • Ergonomically designed rebburized grip.
  • Anti-static electricity for comfortable operation.
RM310.00
  • Lighting up for a long time thanks to high effect LED lights.
  • Compact: Convenient to carry constantly.
  • Easy to hold body of light by comfortable fitting with velcro belt.
RM141.00
  • Brushless motor.
  • Battery fuel gauge.
  • Rubberized lever for quick and easy depth adjustment.
  • Electric brake.
  • LED job light.
RM2,200.00

Specifications

Cutting Capacity 

a) Steel up to 400 N/mm2:1.3mm
b) Steel up to 600 N/mm2:1.0mm

No Load Speed 2800 rpm
Dimensions (L x W x H) 350mm x 80mm x 193mm
Weight (W/O Battery) 2.2kg
 
RM1,598.00

Model: DBO180Z (Without battery & charger)
18V Cordless li-ion 125mm random orbit sander.

Price inclusives 6%GST.

Features

  • Compact design with short height and lower center of gravity for better maneuverability.
  • Ergonomically best possible grip design for comfortable handling.
  • Excellent performance as powerful AC model gives high productivity.
  • Simple to operate electronic push button switch with 3-speed settings. 
  • Connectable to dust extractor. 
  • Compact design with short height and lower centre of gravity for better manoeuvrability.

Specifications

Pad Diameter 123mm
Abrasive Disc Size 125mm
Orbits Per Minute 7000/9500/11000 OPM
Dimensions (L x W x H) 175mm x 123mm x 153mm
Weight 1.7kg

Accessories Included

 

  • Abrasive disc
  • Dust bag
  • Battery & Charger is NOT included. 
RM602.00
  • CXT: Compact eXtreme Technology.
  • Compatible with all OIS accessories.
  • Variable speed control dial. 
  • Soft start. 
  • Anti-restart function. 
  • LED job light. 
  • Accessories can be installed at 12 x 30º increments, across 360º. 
  • Ergonomically best possible barrel grip, with a perfect circumference size and shape whcih fits the hand for extra comfortable handling. 
  • On-tool storage for hex wrench. 
  • Can be connected to a dust extractor with the correct attachment.
RM715.00
  • CXT: Compact eXtreme Technology.
  • Compatible with all OIS accessories.
  • Variable speed control dial. 
  • Soft start. 
  • Anti-restart function. 
  • LED job light. 
  • Accessories can be installed at 12 x 30º increments, across 360º. 
  • Ergonomically best possible barrel grip, with a perfect circumference size and shape whcih fits the hand for extra comfortable handling. 
  • On-tool storage for hex wrench. 
  • Can be connected to a dust extractor with the correct attachment.
RM404.00
  • Tool-less accessory clamp for quick installation and replacement. 
  • 12 angle setting of accessories at every 30°from 0° to 360°. 
  • Variable speed control by dial. 
  • Soft start. 
  • Ergonomic barrel grip - Perfect size and shape for extra comfort. 
  • High operating efficiency. 
  • Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has been used up (Battery protector will shut off the power.). 
  • Anti-restart function prevents accidental start-up.
  • Accepts OIS- Makita, Bosch & Fein accessories.
RM846.00
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
  • Added durability to impact bolt.
  • Large seal ring eliminates grease leakage from matching surface between inner housing and gear housing.
  • Versatile 3 mode operation.
  • One touch sliding chuck for easy bit changes.
  • Torque limiter: When drill bit hits against reinforcement, torque limiter operates to stop.
  • No hammering when idling ensures machine's long life.
  • Reversing switch: Operable by one hand.
  • Variable speed control switch.
  • LED job light with afterglow function.
RM1,316.00
RM1,650.00
  • 3 operation modes "Hammering with rotation", "Hammering only", "Rotation only"
  • Ergonomically designed handle with rubberized grip provides more control and comfort.
  • One-touch sliding chuck enables easy bit changes.
RM1,223.00
RM1,550.00
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
  • Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system.
  • Compact design that maintains the same easy handling and high manoeuvrability as the previous model.
  • LED Job light with pre-glow and afterglow functions.
  • 3 mode operation - Rotation + Hammering - Hammering only - Rotation only.
  • When different capacity batteries are used together, (for example 3.0Ah BL1830 and 4.0Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty.
  • One touch slide chuck for SDS-plus bit.
  • Ergonomic soft grip.
  • Battery capacity warning lamp.
  • 40 different bit-angle settings.
RM1,365.00
  • XPT: eXtreme Pretoction Technology: provides additional resistance from dirt and dripping water.
  • Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system.
  • Compact design that maintains the same easy handling and high manoeuvrability as the previous model.
  • LED Job light with pre-glow and afterglow functions.
  • 3 mode operation - Rotation + Hammering - Hammering only - Rotation only.
  • When different capacity batteries are used together, (for example 3.0Ah BL1830 and 4.0Ah BL1840, or fully charged BL1830 and 70% charged BL1830), the machine stops when the battery with less capacity gets empty.
  • One touch slide chuck for SDS-plus bit.
  • Ergonomic soft grip.
  • Battery capacity warning lamp.
  • 40 different bit-angle settings.
RM1,975.00
  • High power 36V DC Brushless motor.
  • Automatic Speed Control.
  • Double Sliding Mechanism.
  • Soft Start Soft elastomer carrying grip.
  • LED indicator panel for battery fuel and indication of automatic speed control.
  • Electric Brake.
  • Battery Protection Circuit.
  • Cuts up to 300mm in a singe pass.
RM3,196.00
  • High power 36V DC Brushless motor.
  • Automatic Speed Control.
  • Double Sliding Mechanism.
  • Soft Start Soft elastomer carrying grip.
  • LED indicator panel for battery fuel and indication of automatic speed control.
  • Electric Brake.
  • Battery Protection Circuit.
  • Cuts up to 300mm in a singe pass.
RM3,948.00
  • High/Low push button gives two different suction settings. 
  • 3L capacity cloth dustbag. 
  • 2.5m x 28mm hose. 
  • Can be converted into a blower. 
  • Shoulder strap for added mobility.
RM893.00
RM1,150.00
  • Strong suction power 30W.
  • T-noozle enhanced maneuverability.
  • Rubberized soft grip reduces hand fatigue even in long continuous use.
  • Low noise emission : 71dB.
RM263.00
  • Versatile use thanks to 2 different power sources, provides easy manuverability anywhere you need cleaning. 
  • On DC power + On AC Power. 
  • Large on-off switch allows for easy on/off switching. 
  • Functions only when Main power switch is on to prevent accidental switch-on during transportation, ect. 
  • Dual battery fuel gauge. 
  • Variable suction power control by dail. 
  • Caster stopper. 
  • Removable storage box. 
  • On-tool pipe storage.
RM2,775.00
  • Long run time of 50minutes with a full charged 18V 5.0Ah battery.
  • Built-in metal mesh filter prevents vacuum pump oil from scattering from exhaust port.
  • Valve prevents securely oil back flow.
  • Pump structure: Oil rotary type (vane type).
  • Easy to carry with a compact and lightweight body.
  • Drain port with valve allows for easy change of vacuum oil pump.
RM2,305.00
  • Planes a width of 82mm (3¼") in a single pass。
  • Unrivalled for sheer power, size and performance。
  • Fitted with a comfortable operator handle with a rubberised soft grip which is widely covered with elastomer for more comfort control and less fatigue.
  • Straight line face for easy to push handle.
  • A precision machined aluminum base allows for planing accuracy and the cutter head makes 14000 cuts per minute for fast stock removal.
  • The lock-on button gives the operator the option of continuous operation.
  • Left and right handed use due to the buttons on either side of the handle.
  • Dust extraction port on the side with enhanced chip ejection.
  • Adjustable up to a 2mm depth of cut.
  • Shoe on the underside stops accidental laying down of planer while blade is still moving. This limits the damage on the workpiece and the blades from scratches.
  • Rebates to a maximum depth of 9mm.
  • V-Groove on base for easy chamfer cutting.
RM837.00
  • Good reputation for pipe and angle iron cut-off work.
  • Quick relieves vise for secure stock retention and fast repeated cut-offs.
RM2,070.00
  • Soft rubber grip side handle minimizes vibration and swivels 360° for operator convenience
  • Unique anti-vibration spring is postitioned between tool body and rear handle for reduced operator fatigue
  • Accepts same shank demolition bits as spline shank rotary hammers
  • One-touch tool retainer action for easy accessory installation and removal
  • Carbon brushes last for approximately 150 hours
  • Factory grease packed for reduced maintenance
RM893.00
  • Anti-slip rubber cover for easy handling.
  • Round-shaped collet nut reduces the possibility of damages/scratches to workpiece.
  • Swith lever conveniently located for one hand operation.
  • Vent slots designed to direct the exhaust air stream towards the opposite side of the operator.
  • High heat resistance.
RM348.00
  • Paddle type on-off switch.
  • Adjustable Speed Control: 7000-29000rpm.
  • Constant speed control.
  • Soft start: Suppresses start-up reaction.
RM1,147.00
  • Paddle type on-off switch.
  • Adjustable Speed Control: 7000-29000rpm.
  • Constant speed control.
  • Soft start: Suppresses start-up reaction.
RM1,147.00
  • Anti-slip rubber cover for easy handling.
  • Round-shaped collet nut reduces the possibility of damages/scratches to workpiece.
  • Paddle type on/off switch.
  • Vent slots designed to direct the exhaust air stream towards the opposite side of the operator.
  • High heat resistance.
RM358.00
  • Lightweight at only 1.1kg.
RM686.00
  • The Makita DC18RD dual port charger is capable of charging two Makita 18V batteries at the same time.
  • The charging time is the same as the single port charger DC18RC.
  • Also features a USB Port for charging mobile phone, tablets, etc. This USB port provides 15A output.
  • A built-in CPU - gathers information from the battery's memory chip to determine optimum charging methods while a forced air cooling fan cools the battery to minimise charging time.
  • With an audible sound alert to indicate full charge and an LED Charging Display.
RM545.00
  • Ideal for wall chasing.
  • Dust free performer for fast and cleaner dry cutting when connected to dust extraction.
  • Overload motor protection for longer motor life.
RM875.00
Continuous Rating Input   600W
Air Volume 0 - 4.1m3/min
Air Pressure 0 - 5.7kpa (0 - 580mm H2O)
No Load Speed 0 - 16000rpm
Overall Length 480mm (18-7/8")
Net Weight 2.0kg
Power Supply Cord 2.5m
RM367.00
Continuous Rating Input  1800 W
Chain Speed per Minute 800m
Guide Bar Length 350mm (14")
Chain Blade Pitch: 3/8"
Gauge: 0.050"
Cable Cord 0.3meter
Dimensions (L x W x H) 417mm x 245mm x 198mm
Weight 3.7kg
RM611.00

Continuous Rating Input     1800 W

Chain Speed per Minute    800m

Guide Bar Length    400mm (16")

Chain Blade    Pitch: 3/8"

Gauge: 0.050"

Cable Cord    0.3meter

Dimensions (L x W x H)    467mm x 245mm x 198mm

Weight    4kg

 

RM611.00
Continuous Rating Input  2000 W
Chain Speed per Minute 800m
Guide Bar Length 400mm (16")
Chain Blade Pitch: 3/8"
Gauge: 0.050"
Cable Cord 0.3meter
Dimensions (L x W x H) 492mm x 201mm x 220mm
Weight 5kg
RM988.00