GTM-PBS9DQC Special Offers
Hand Tools
Welcome to www.hand-tools.com.my & www.amatrix.com.my
Special Offers
Sort by
Show result
  • Use extensions to gain access to fasteners in locations that would otherwise be difficult to reach
  • Male square is oriented in-line with female squares for use with fixed head torque wrenches
  • Full chamfer at drive opening (when applicable) for easy engagement with drive tools
  • Drive end chamfer and four detents help provide quick positive engagement with drive tool on any of the socket drive walls
  • Features two thru holes and a groove to accept a Proto retaining ring or pin or O-ring to help secure extension to the drive tool anvil
RM220.00
RM275.00

• Flow-rate (range): 20÷120 l/min (5,3÷32 gal/min).
• Precision: ±1% of flow range after calibration.
• Repeatability: 0,2%.
• Max. operating pressure: 10 bar (142 psi).
• Bursting pressure: 30 bar (426 psi).
• Readout system:
- K33, 3-digit subtotals (max 999 litres), 6-digit totals.
- K44, 4-digit subtotals (max 9999 litres), 7-digit totals.
• Resolution: 0.1 litre.
• Pulser card type: “Open collector”, frequency: 10 pulses/litre, power supply: 6-24 V DC, max 10 mA. 

RM862.90
RM1,288.00
  • cuts PVC .Aluminium  or Plastic Pipes.
  • When Cutting PVC  Flexible pipe you  should  revolve the pipe whilst compressing.
  • Scope of cut:rigid plastic pipes to a maximum diameter of 42mm
RM22.00
RM27.50
  • Heat treated steel J-hooks
  • Dual-gear ratchet applies more tension with less effort
  • Quick-release dual pawls stay locked and maintain tension during transit

 

RM238.00
RM280.00
  • Heat treated steel J-hooks
  • Dual-gear ratchet applies more tension with less effort
  • Quick-release dual pawls stay locked and maintain tension during transit

 

RM205.00
RM240.00
  • Reseal & Save is a battery operated unit that reseals all plastic bags in seconds
  • The clutter cutter allows for easy cutting of resealed bags
  • Reseals over 300 times with one set of AA batteries! (not included)
  • Its easy - Place the open end of your bag onto the heat strip, close and press
  • Works on all your favourite food bags for crisps, pasta, rice and more!
  • Ideal for the kitchen, office, workshop, camping, travelling and gardening
RM18.00
RM32.90
  • Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. 
  • Black oxidised finish with permanent laser etched markings. 
  • Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.
RM9.30
RM25.00
  • Frame colour: Translucent dark grey
  • Temple color: Black
  • Lens colour: Clear / Silver Mirror
RM26.00
RM41.80

-Rubber sole with reinforced side stitching.
-Buffalo leather.
-Oil resistant.
-Shock Absorbent.
Classification: S1P.
200J Steel toecap.
Steel midsole.

Antistatic soles.

RM50.00
RM104.00
  • Certificate EN ISO20345 S3Upper 
  • MaterialEmbossed Buffalo Leather + Codura + PUOut 
  • Sole MaterialDual Density Injected PUMidsole MaterialKevlarToecup MaterialComposite – 
  • Metal FreeApplication FieldAll Purpose –
  • Management – Engineers
RM185.00
RM210.00
  • Sanwa DCM400AD AC/DC Digital Clamp Meter
  • ■4000 count / 42 segment analog bar graph
  • ■Suitable for automotive maintenance & DMM functions
  • ■DC / AC current 40A/400A
  • ■Data hold / Range hold
  • ■Relative value
  • ■Continuity check buzzer
  • ■Auto power off (30min.)
  • ■Low battery power indication
  •  
  • Display : numeral display 3999, bar graph 42 segments
  • Sampling rate : 2 times / sec. 20 times / sec. for bar graph
  • AC frequency bandwidth : 50〜500Hz
RM630.00
RM700.00
  • SANWA DCM60R AC/ Clamp Meter + True RMS
  • ■True RMS
  • ■Measurable AC 0.1A~600A
  • ■ACV & Resistance measurement
  • ■Small Design & easy to carry
  • ■Data hold
  • ■Continuity check buzzer
  • Sampling rate : approx.2 times / sec.
  • AC frequency bandwidth : 50~400Hz
  • Safety
  • IEC61010-1 (EN61010-1) 2001-02 CAT.III300V Max. / CAT.II 600V
RM170.00
RM390.00

Wide handle for improved comfort and better leverage

● Wide opening jaw for greater capacity and allows each tool to work
    with more fastener sizes

● Dipping handle for better grip

● Larger knurl for smoother operation

● Matte finished

RM102.00
RM136.36

 Forged jaw, featuring easing spinning adjusting nut

● Made of chrome vanadium steel for strength and durability

RM153.00
RM153.00

● Versatile curved jaw features integral wire cutter

● Nickel-plated finish resists rust and corrosion

● Angled tooth pattern for better grip

● Made of chrome molybdenum alloy steel for exceptional strength and durability

RM55.00
RM78.69
  • The Most Commom Brand of Switch
  • Easy to Match to any interior
  • Easy for Replacement
  • Residential, commercial and hotel applications
  • British, Chinese and Australian installations
  • Flush- or surface-mounted installations
RM6.90
RM11.90
  • Motor Power: 85W
  • Motor Speed: 1450rpm/50Hz
  • Max. Cutting Dept: 50mm
  • Max. Cutting Width: 410mm(16")
  • Table Size: 375x250mm
  • Blade Size:133x2.6x0.25mm 18T
  • Table Tilting Range:0-45°

 

RM588.00
RM840.00
  • Impact Resistant abs plastic case
  • Unbreakable Fibreglass Blade. Corrosion & waterproof
  • 1/2" blade width
  • Easy to read dual scale
  • Double roller blade feed
  • Re-inforced blade tip
  • metal end loop
  • ABS winding handle.
RM39.00
RM68.00
  •  Hi-temp - up to 650° F
  •     Oxygen sensor-safe
  •     Low odor / non-corrosive
  •     Forms instant leakproof gaskets on all engines
  •     Low volatile formula meets GM 9985443 spec
  •     Extreme pressure resistance
  •     100% Silicone – No fillers added
  •     Great adhesive & sealant for many materials-metal, glass, plastic, wood, rubber, fiberglass, etc.
  •     Neutral cure

 

RM20.00
RM25.00
  •     Hi-temp - up to 650° F
  •     Oxygen sensor-safe
  •     Low odor / non-corrosive
  •     Forms instant leakproof gaskets on all engines
  •     Low volatile formula meets GM 9985443 spec
  •     Extreme pressure resistance
  •     100% Silicone – No fillers added
  •     Great adhesive & sealant for many materials-metal, glass, plastic, wood, rubber, fiberglass, etc.
  •     Neutral cure
RM20.00
RM25.00
  • Single Water Filter
  • Applicable On PP Sediment Filter or CTO Carbon Block Filter
  • PP Sediment Filter 
  • The filter is made of Polypropylene with its to reduce sand, silt, scare rest and iron particles
  • Should be replaced 3 to 4 times annually, depending on your water condition
  • Fine filtration (1 or 5 micron)
  • OR
  • CTO Carbon Block Filter
  • Carbon block filter for the removal of chlorine, taste, odor and other chemicals contaminants
  • Fine Filtration (1 or 5 micron)
RM58.00
RM120.00
  • Aluminum Handle with Steel Clutch Housing
  • Compact and Powerful
RM420.00
RM600.00
  • Here is a brand new Spark Plug Wire removal Pliers.
  • They were designed for use on Mercedes 4, 6 and 8 cylinder engines, but can be used on many different makes and models.
  • The durable plastic handle reduces shock when using to diagnosis a misfire. Very useful tool!
  • for R&R spark plug connectors
  • recommended for model 190E & 300 E or most Europenan cars
  • length : 220M
RM61.00
RM87.00
  • Voltage 230V 50Hz
  • Motor 85W
  • Motor Speed 1440rpm
  • Max Cutting Depth 50mm(2")
  • Max Cutting Width 410mm(16")
  • Table Size 375×250mm
  • Table Tilting Range 0-45°
  • Blade Size 133×2.6×0.25mm(18TPI)
RM500.00
RM580.00
  • Jaws fully hardened and tempered
  • 25% more torque
  • For holding on fastening nuts and bolts
  • Rust resistant finish
  • Length: 10" (250mm)
RM36.50
RM51.50
  • 4 Drawers roller cabinet
  • Overall dimension 698 x 477 x 973mm (W x D x H)
  • Drawer dimension 560 x 410 x 75.5mm (W x D x H)
  • Load capacity of top tray is 30kg, every drawer is 25kg, and bottom is 35kg
  • Plastic top tray to organize tools.
  • Comes with folding tray.
  • Lockable wheel with Rubber Castor.
  • Concave on both side to hold more tools.
  • Bumper rubber on corners to prevent scratching
RM3,890.00
RM5,586.80
  • Drop-forged carbon steel material, hardened, tempered, grown, glazed & tested to last
  • Cold-rolled steel: 0.78
  • Stainless steel: 0.45
  • Size: 10"
RM41.00
RM57.40
  • Drop-forged carbon steel material, hardened, tempered, grown, glazed & tested to last
  • Cold-rolled steel: 0.91
  • Stainless steel: 0.63
  • Size: 12"
RM53.00
RM75.70
  • Lenght(mm)           : 203
  • Lenght(inches)      : 8
  • Max Cutting Load: 36
RM52.00
RM80.00

Lenght(mm)           : 305

Lenght(inches)      : 12

Max Cutting Load: 46

RM85.00
RM125.00

Lenght(mm)           : 355

Lenght(inches)      : 14

Max Cutting Load: 54

RM91.00
RM139.00

Lenght(mm)           : 457

Lenght(inches)      : 18

Max Cutting Load: 65

RM104.30
RM158.00
  • A range of bolt cutter in most popular sizes
  • Cutter blades are of chrome molybdenum tempered steel with cutting jaws tempered HRC 60° °±4 (FBS Standard)
  • Special heat treatment gives blades extra hardness and durability
  • Easy to Carry
  • Meet ANSI standards
RM148.00
RM254.00

Lenght(mm)           : 762

Lenght(inches)      : 30

Max Cutting Load: 84

RM222.00
RM275.00

Lenght(mm)           : 914

Lenght(inches)      : 36

Max Cutting Load: 104

RM223.00
RM365.00
  • 100% GENUINE ORIGINAL STANLEY BRAND
  • POWERFUL 1510W MOTOR WITH NO LOAD SPEED AT 5500RPM
  • DEPTH OF CUT 62MM
  • CABLE LENGTH 2M
  • SOFT GRIP FOR COMFORTABLE HANDLING
  • RETRACTABLE LOWER GUARD
RM299.00
RM499.00
  • Handle offers a square/mitre feature with 45D and 90D angles
  • Contoured sturdy handle designed for comfort and control condolences
  • Full length protective sleeve
  • Contents: 6T/7PT 18"
  • Tooth pattern: Crosscut
RM28.00
RM38.70
  • Handle offers a square/mitre feature with 45D and 90D angles
  • Contoured sturdy handle designed for comfort and control condolences
  • Full length protective sleeve
  • Contents: 6T/7PT 20"
  • Tooth pattern:Crosscut
RM29.00
RM41.00
  • Handle offers a square/mitre feature with 45D and 90D angles
  • Contoured sturdy handle designed for comfort and control condolences
  • Full length protective sleeve
  • Contents: 6T/7PT 22"
  • Tooth pattern: Crosscut
RM32.00
RM45.60
  • 26 strand 12mm wide blade
  • 2 colour graduations - easy to read in all conditions
  • High impact, high visibility yellow ABS case
  • Handle folds for storage
  • Class III Accuracy
  • Description: Long tape closed F/G
  • Blade length: 30m (100ft)
  • Blade width: 13mm (1/2")
RM54.00
RM77.50
  • 26 strand 12mm wide blade
  • 2 colour graduations - easy to read in all conditions
  • High impact, high visibility yellow ABS case
  • Handle folds for storage
  • Class III Accuracy
  • Blade length: 50m (165ft)
  • Blade width: 13mm (1/2")
RM79.00
RM112.00
  • The Hammer head is attached with 2 wedges for better durability
  • Natural hardwood handle
  • Meets ANSI tandards
  • Hammer claws 15% longer for greater ease in pulling nails
  • Head length: 330mm (13")
  • Weight: 450gm (16oz)
RM22.50
RM33.00
  • The hammer head is attached with 2 wedges for better durability
  • Ball end use for riveting and poll used for normal striking
  • Meets ANSI standards
  • Handle 25% longer in 16 - 302oz sizes for better balance and control
  • Head length: 355mm (14")
  • Weight: 450gm (16oz)
RM46.50
RM66.00
  • Improved ergonomic design for maximum grip and torque
  • Ergonomically designed, bi-material handles for maximum comfort and for greater torque to be applied with less effort
  • Chrome vanadium blade with tough hardened black oxide tips
  • Nickle-plated bar for corrosion resistance
  • High quality, heat treated plated bars for lasting " pro" performance and rust resistance
  • Length: 5 x 100mm (3/16" x 4")
RM6.60
RM9.50
  • Improved ergonomic design for maximum grip and torque
  • Ergonomically designed, bi-material handles for maximum comfort and for greater torque to be applied with less effort
  • Chrome vanadium blade with tough hardened black oxide tips
  • Nickle-plated bar for corrosion resistance
  • High quality, heat treated plated bars for lasting " pro" performance and rust resistance
  • Length: 6.5 x 45mm (1/4" x 11/2")
RM8.90
RM12.80
  • Improved ergonomic design for maximum grip and torque
  • Ergonomically designed, bi-material handles for maximum comfort and for greater torque to be applied with less effort
  • Chrome vanadium blade with tough hardened black oxide tips
  • Nickle-plated bar for corrosion resistance
  • High quality, heat treated plated bars for lasting " pro" performance and rust resistance
  • Length: 6.5 x 150mm (1/4" x 6")
RM9.50
RM14.00
  • Power 650w
  • No Load Speed 800 - 3,200rpm
  • Stroke Length 20mm
  • Cable Length 3m
  • 2.7Kg
RM299.00
RM399.00
  • Attractive bi-material handles designed for easy and comfortable grip
  • Chrome vanadium steel bars in black oxide finished with hardened tips - HRC 53
  • Comes in 6 popular sizes
  • Contents: 6pc precision 0 & 1pt phil
RM14.00
RM21.50

Test tange of 100-500V
Pocket size model c/w clip
Attractive PP card packaging
Blade Length : 100 (or 4")
Overall Length : 178mm (7 1/2")
Tip Width : 5mm (3/16")

RM9.20
RM13.10
  • 69-799 body is nickel-plated
  • Versatile tool for joining sheet metal, fabric, leather, plastic parts, etc
  • Spring loaded handle ejects rivets stem
  • All steel body with non-slip grip-wrench for changing nosepieces
  • Contents: Heavy duty riverter c/w 4 nosepieces for 3/32", 1/8", 5/32", 3/16" rivets
  • Pin head: Flat
RM53.00
RM76.00
  • Stanley 5" Bench Vise Cast Steel Body Chromed Handle Short Screw Sationary base Clamping force up to 3000kgs
  • Better performance
  • better than Iron
RM412.00
RM438.00
  • Jaws fully hardened and tempered
  • 25% more torque
  • For holding on fastening nuts and bolts
  • Rust resistant finish
  • Length: 12" (300mm)
RM49.00
RM68.68
  • Jaws fully hardened and tempered
  • 25% more torque
  • For holding on fastening nuts and bolts
  • Rust resistant finish
  • Length: 15" (375mm)
RM90.00
RM127.37
  • Ball bearing slide with quick disconnect
  • Double wall construction with heavy duty metal side handle to provide ultimate durability
  • Full-length drawer pulls with liners and top vinyl mat includes
  • Heavy duty 5”x2” casters and easy grip cabinet side handle for better mobility
RM2,380.00
RM5,469.20
  • Jaws fully hardened and tempered
  • 25% more torque
  • For holding on fastening nuts and bolts
  • Rust resistant finish
  • Length: 8" (200mm)
RM31.00
RM42.90