Bestsellers
- 30m range
- Ideal for DIY use
- Estimate required materials quickly and accurately
- Addition / subtraction calculator
- Easy to take measurements in out of reach areas
RM519.00
- Fine grey iron base accuratley machined for stability and precision in use
- Light duty
- Easily and simply adjusted
- Chrome carbon cutter
- Simple lateral and depth adjustment
- Virtually unbreakable high impact injection moulded handles for comfort and long life
RM172.00
- Professional fully adjustable metal plane
- General purpose bench plane for workshop, site or fine finishing
- Kidney shaped lever cap screw hole prevents accidental slippage of cutter
- Chrome carbon steel cutter hardened and tampered to retain a keen cutting edge
- Fully adjustable frog for all tasks and timber types
- Virtually unbreakable polypropylene handle and knob shaped for comfort
- Finger tip adjustment for depth of cut and cutter alignment
- Tight fitting spring steel cap iron for perfect shaving flow
- recision cast fine grey iron base for stability and wear resistance
- Precision ground base and sides ensure performance to the highest tolerances
RM291.00
- A non-adjustable general purpose block plane. Ideal for the occasional user or DIY'er for a range of light-duty applications.
RM137.00
- Jointer plane
- Performs a dual role between stock removal and accurately truing up long edges or levelling wide boards
- Fully adjustable
- Machined frog and cutter seating to reduce chatter
RM625.00
- The Karcher SV 7 steam vacuum cleaner combines the advantages of steam cleaners with the power of dry vacuum cleaners. For example, it picks up crumbs, wipes wet and subsequently dries floors, all in one easy procedure. These impressive all-round devices and matching accessories can clean any home easily, conveniently, quickly and without chemicals.
RM4,100.00
- The K4 Premium features a water-cooled motor and is ideal for occasional use around the home. This high-pressure cleaner is ideal for removing moderate dirt, e.g. on small vehicles, garden fences or bicycles. This machine features a hose reel for ease of use and storage. Features include a gun with Quick Connect connector, 6 m high-pressure hose, Vario Power spray lance (VPS), dirt blaster with rotating pencil jet for removing stubborn dirt, water filter for pump protection and P&C universal cleaner. The pressure can be adjusted by simply twisting the VPS - for effective and surface-friendly cleaning.
RM1,500.00
- The T14/1 Classic ALA dry vacuum cleaner is a lightweight and robust machine offering a high level of operating comfort, powerful suction and an excellent price-performance ratio. This machine has a large foot switch for ease of use as well as variable suction power regulation for adjustment to suit the particular cleaning task and a 14 litre catch pan for non-stop use. After vacuuming, the filter bag can be changed quickly and easily thanks to two flaps on the turbine head. A large permanent filter of washable nylon ensures efficient dust separation. The ergonomically shaped handle enables easy transport over steps or long distances. In addition, the robust chassis with 2 wheels and steering rollers ensures easy manoeuvrability.
RM650.00
- Adjustable leverage adapts pump to lubricant and operating conditions.
- Designed for both high volume transfer and dispensing a variety of low viscosity fluids
- Equipped with air connector and quick detach coupler
RM725.00
- Ultra-Filtration Membrane Separating technology is a new high tech of water purification. In the application of the purifying tap water, the hollow fibre membrane filters colloid, impurities, rust, bacteria, algae and macromolecule organism, etc. It can remove harmful organic molecules, chlorine and improve the water taste.
RM937.00
- Easy-reading 2-1/2" diameter gauge features color-coded quadruple calibrations with 0-300 psi, 21 kg/cm, 21 bar & 2100 kpa.
- 13" durable rubber hose with 14mm/18mm adapter.
- 6" heavy-duty stem with universal rubber cone adapter fits all plug holes.
RM119.00
RM160.00
- Complies with newest CE safety standard
- Adopt 3 1/2 digits, the maximum is up to 1999 counts
- Palm size for easy storage and carrying
- User friendly interface is ideal for students, DIY market. home applications and more
- Solid and elegant cover to protect it well
- Large LCD with white backlight function for easy catching readout
- Backlight, data hold, low battery indication, overload protection indication
- It is ideal for such fields as smelting, manufacturing, petrol, chemical industry, etc
RM49.00
- - Max. & Min. function.
- - Over & Underrange indication.
- - 4-digit LCD display with bar graph.
- - Frequency weighting characteristicfor 2 times per second.
- - AC signal output.
- - Low battery indication
- - IEC 651 Type 2 & ANIS S1.4 Type 2.
RM723.00
- 1.High quality carbon steel 8P8C forging made hardened finished.
- 2.Spring-loaded for self-opening action to reduce fatigue when long term operation.
- 3.Plastic coated handles for easy operation.
- 4.Particularly design for electronic and precision field.
- 5.OAL: 200mm
RM49.50
- Full length: 156mm
- Precision milling machine, size precision, and a cut, hold functions
- Stripping and a 6-hole cut, hold functions
RM55.00
- Energy saving
- Comes with 30 LEDs which provide bright lighting and only 5.5W consumption
- Up to 50,000 hours 20X longer lifetime
- The LED features long lifetime reaches to 50000 hours, is 20 times longer lifetime than incandescent lamp
- Zero electromagnetic interference
- Comes with switching adapter, more environment friendly and provides even more stable performance
- 3D (1.75X) glass lens 115x73mm
- Design with 3D(1.75X) magnification Glass Lens, great for working on hobbies, PCB and documents
- Easy positioning
- The adjustable arm allows angling and pointing the light to where you need.
RM189.00
- For electronics; melting gold, silver & small cooper rods
- Refillable
- Changeable head: soldering tip or torch nozzle
RM65.90
- TIRE GAUGE SELLERY 56-605
- -Self-adjusting friction indicator device.
- -Quality and accuracy for better tire mileage.
- -Head lets you deflate.
- -Pocket clip.
RM5.50
- SELLERY 31-510 WALL STRIPPER 4” x 12”
- Applications: for stripping & removing wall paper, paint & varnish
RM18.00
- * This padlock range offers general security for outdoor conditions.
- * They can be applied to gates, garages, shutters and shed doors.
- * These padlocks' unique satin chrome plated finish and Boron shackle increases resistance to attack.
- * Double locking shackle.
- * Self-latching mechanism.
RM118.00
- -Tough new satin chrome plated finishes
- -Single locking shackle
- -Self-latching mechanism
- Body material: Solid Brass/Satin Chrome
- Shackle material: Boron Steel
- No. of padlocks: 1
- No. of keys: 3
- Security grading: 5
- Corrosion rating: Outdoor
- Body width MM: 60
RM69.00
- The Yale Y121 Brass Padlocks are high security padlocks, suitable for outdoor use. They have a protective cover and a precision 5 pin cylinder with anti pick mushroom pins to withstand attack.
- A chrome hardened steel closed shackle makes these padlocks harder to attack through additional strength and difficulty to access.
- Tested to EN12320:2001, the Y121 padlocks achieve a CEN2 rating.
RM52.00
- -Protective black weather resistant cover.(Suitable for all outdoor to extreme conditions.)
- -Double locking shackle
- -Ball bearing locking mechanism
- Body material: Laminated Steel/Zinc
- Shackle material: Hardened Steel
RM43.00
- -Soft polyurethane foam offers maximum wearer comfort
- -Smooth, dirt-resistant surface
- -Tapered design fits most ear canals
RM112.00
RM158.00
- 3M 1271 Reusable Corded Earplugs c/w case are washable, reusable earplugs that have a triple - flange system designed to securely fit your ear canal as best as possible, when worn correctly.
- Packed in a box of 50 prs / box.
RM338.00
- 3M 2700 Classic Visitors / Overspec Safety Eyewear.
- An ideal option in providing visitors with eye protection.
- Integral browguard and side shield for increased safety.
- Can be worn over most prescription glasses Code : 0203-M-0023
RM15.80
- 3M 3100 Single Cartridge Respirator was made specifically for the slender Asian faces and for a wide range of industries i.e. Agriculture, Automotive etc.
- The 3M 3100 is size Small / Medium.
RM38.00
- 3M 3200 Single Cartridge Respirator was made specifically for the slender Asian faces and for a wide range of industries i.e. Agriculture, Automotive etc.
- The 3M 300 is size Medium / Large.
RM41.00
- 3M 3700 Filter Retainer for 3000 Series is made to be used with the 3000 series respirator and the 3M 3744 Filter.
RM16.00
- 3M 3744 Particulate Filter with carbon layer is for use with the 3M 3000 series respirator and the 3M 3700 filter retainer.
- Comes packed in a box of 10 pcs / box.
RM65.00
- 3M 7501 Silicone Double Respirator is one of the best - selling respirators where because of the soft nature of the silicone, users find more comfort when wearing it compared to other respirators!
- Made from one of the highest grades of silicone, this is a sure winner with your end users!
- Size 7501 is SMALL.
RM118.00
RM135.00
- 3M 7503 Silicone Double Respirator is one of the best - selling respirators where because of the soft nature of the silicone, users find more comfort when wearing it compared to other respirators!
- Made from one of the highest grades of silicone, this is a sure winner with your end users!
- Size 7503 is LARGE
RM138.00
- 3M 8511 N95 Maintenance Free Respirator with Exhalation Valve is suitable for use in dusty environments or spraying that are not oil-based and do not emit harmful vapors.
- The exhalation valve makes breathing more comfortable for the user as warm / hot air is expelled out of the respirator.
- Packed in a box of 10 pcs / box
RM85.00
- 3M 9310 P1 Folded Maintenance Free Respirator is for use against dusts / non-oil mists found in a wide variety of industries.
- These respirators come individually packed in 20 pieces / box
RM158.00
- 3M 8210 Particulate Respirator N95 Face Mask (20PCS/BOX)
- Niosh Approved : N95
- At least 95% filtration efficiency against solid and liquid aerosols that do not contain oil, See insert for approval label
- Suggested Applications Particles such as those from grinding, sanding, sweeping, bagging, woodworking, foundries or Other dusty operation.
- Use For : 1. Solid such as those from processing coal, iron, ore, flour, and certain other substances.
- 2. Liquid and non-oil based particles from sprays that do not emit harmful vapors.
RM58.00
- KING TOYO KTMTW-F150
- Manufactured from chrome vanadium steel.
- Reversible ratchet head, Micrometer-type sleeve allows accurate - (20-150Ft Lbs) torque values
- Included case for protective storage
RM192.00
RM240.00
- KING TOYO KT-TW3241S
- Square : 3/8"
- Torque : 2.5-11Nm, 0.3-1.2kgf.m, 20-100 in lbs, 2-8 ft lbs.
- Lenght : 338mm
- Length independent mechanism
- Push through reversible mechanism
- Retractable adjustment mechanism avoids accidental adjustment
- Accurate to ±4% •
RM470.00
- KING TOYO KTMTW-N030 MICROMETER TORQUE WRENCH (RACHET TYPE) 1/4" DR. 6-30NM (350MM-L)( NTP-030N), KTMTW-N030
- Chrome plated, polished steel head.
- Retractable torque setting lever.
- CLICK & SNAP action indicates when the pre-set torque level has been reached.
- Knurled grip plastic handle.
- Hear Gear, Washer,pin and head nut
- Dual Scale (Nm and Ft.lbs)
- Fixed Round Ratchet head with reversible lever.
RM305.00
- KING TOYO KTMTW-N110 MICROMETER TORQUE WRENCH (RACHET TYPE) 3/8" DR. 19-110N-M (385MM-L)( NTP-110N), KTMTW-N110
- Chrome plated, polished steel head.
- Retractable torque setting lever.
- CLICK & SNAP action indicates when the pre-set torque level has been reached.
- Knurled grip plastic handle.
- Hear Gear, Washer,pin and head nut
- Dual Scale (Nm and Ft.lbs)
- Fixed Round Ratchet head with reversible lever.
RM335.00
- KING TOYO KTMTW-N350 MICROMETER TORQUE WRENCH (RACHET TYPE) 1/2" DR. 70-350N-M (645MM-L)( NTP-350N), KTMTW-N350
- Chrome plated, polished steel head.
- Retractable torque setting lever.
- CLICK & SNAP action indicates when the pre-set torque level has been reached.
- Knurled grip plastic handle.
- Hear Gear, Washer,pin and head nut
- Dual Scale (Nm and Ft.lbs)
- Fixed Round Ratchet head with reversible lever.
RM532.00
- Masada MS3 Hydraulic Bottle Jack
- Capacity 3 ton
- Min. Height 190mm
- Lift 115mm
- Extension Screw Height 60mm
- Max Height 365mm
- Weight 2.7kg
RM158.00
- 900mm insulated cable and earth clip
- Insulated piercing contact point with protective screw cap
- For testing the car light
RM14.00
- Hardened-steel and easy operate
- Handle can be folded away for easy storage
- Ideal for disassembling rivet type roller chain
- To repair your motorcycle/bicycle chains with strength & ease
- This chain breaker is ideal and essential tool for use on 420, 428, 520 & 530 chain
RM64.00
- Hardened-steel punch forces pin all the way out
- Design for motorcycle and bicycle
- Easy operate
- Ideal for disassembling rivet type roller chain
- To repair your motorcycle/bicycle chains with strength & ease
RM72.00
- Quick tighten and release design
- For inserting the piston with ring into the cylinder
- High quality spring steel band with square drive adjuster included
- Supplied with Allen key
- Used for assembling pistons of car’s engine with pistons rings into the cylinder
RM25.00
- Curved outlet pipe & coupler with ball check & hardened jaws
- Heavy-duty construction for professional operation & home users
- To apply lubricant through an aperture to a specific point
- Ideal for machines, automobiles, farm and garden equipment recreation vehicles and etc
RM40.00
- 500CC OIL SUCTION GUN
- Chrome plated, equipped with 11” flexible plastic hose
- Heavy-duty construction design for professional operation users
- For clutches, agricultural and industrial chemical additives, transmission differentials, brake master cylinders, oil filters or other type of sumps or sampling engine oil, needs no priming
RM45.00
- The fast, easy cleaner-polisher & rust remover
- Cleans & polishes in one operation
- Bright mirror shine for chrome bumpers & trim
- Removes traffic film, bug residue & rust stains quickly & easily
- Excellent for polishing nickel, brass, copper & stainless steel
RM35.90
- ENGINE CLEAN DEGREASER
- Cuts & dissolves grease & grime
- Spray on – rinse off
- C-39 Self-emulsifying foaming formula (low VOC)
- C-30 Penetrating solvent formula
RM26.00
- E-MARK 65026 24 pcs Ratchet Socket Set (CR-V Steel)
- 12-point
- Contents:
- 18 Pcs Sockets : 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm
- 125mm, 250mm Extention Bar
- Sliding T-Bar
- Universal Joint
- Spark Plug Socket
- 72 teeth ratchet
RM188.00
RM288.00
- STANLEY TR150 SHARPSHOOTER HEAVY DUTY STAPLE GUN
- Easy-squeeze handle reduces hand fatigue
- Anti-jam mechanism saves time on the job
- High-visibility yellow color easy to spot in a toolbox or workshop
- Durable aircraft-aluminum housing withstands heavy use
- Delivers high power and deep penetration
- Easy-slide full-stick staple load
- Uses Stanley® SharpShooter® TRA700 or Arrow® T-50® heavy duty staples
RM155.00
- 29PCS CREWDRIVER INSERT BITS SET STANLEY 68-071
- Made from chrome vanadium steel
- Recommended for manual applications in multi-bit screwdrivers
RM30.00
- ALUMINIUM QUEEN LADDER (WITH HAND RAIL) (QL)
- General household & office application
- Recommended design for women and ladies usage
- Available from 3 to 10 steps
- Safety guide rail support user's foot standing position
- Joint ladder to make the stability of the ladder
- Large platform
- Strengthen locking hinge for added stability with solid rivet
- Slip resistant foot pad
- Natural anodized for durability
RM232.10
- Circular Saw Blade 7-1/4"x1"x 60T with 16&20mm Adaptor Stanley 20-523
- -Tungsten carbide tips for longer cutting action-60 times longer than steel blades.
- - Thin kerf design for more efficient cuts.
- - Expansion slot for longer lasting blade.
- - Fo ipping and cross cutting of hand /soft wood,plywood.
- - Made using Auto-grinding and Auto-welding machine.
RM45.00
- TOPSAFE TS502 WORK SERIES SAFETY SHOES (without Steel Midsole)
- 5" Slip-on Boot in Black
- Barton Print c/w S.T.C.
- All TOPSAFE Footwear Work Series offer high quality safety footwear suitable for all areas of industry and sector, and conformed to MS 1599:1998 (EN 345:1998) standard, from stylish protective footwear to heavy industrial footwear.
- SIRIM CERTIFICATE
RM90.00
- Bosch tools – Cordless Drill/Driver GSR 1440-LI
- · Powerful and reliable tool
- · 14.4 Volt lithium-ion drill/driver
- · Bosch Electronic Cell Protection (ECP): Protects battery against overload, overheating & total discharge
- · No memory effect: Battery can be charged regardless of the charging state at any time, without damaging the cells
- · Interchangeability between 10.8 Volt and 14.4 Volt battery packs
RM448.00
- Bosch tools – Cordless Impact Wrench GDX 250-LI
- · The affordable impact wrench with innovative ABR-software to increase your working efficiency
- · 3 times higher working efficiency than manual tool Long working hour without fatigue
- · Tighten the bolt easily
- · Long usage time Low total cost of ownership
- · ABR (Auto Bolt Release) Max. 250 Nm torque Robust front cap and gearbox design Carbon brush changeable De-bundled gearbox Slim grip design
- · Light weight 1.6 KG only
- · High torque 250 Nm to ensure great performance
RM560.00
• Align single disc clutches on most vehicles, light truck & tractors.
• Properly aligns clutch plate by tapered cone fitting into pilot bushing or bearing.
• Size: 8 collects ranging from 0.465" (11mm) to 0.980" (24.9mm).
RM141.00
- JTC1424 UNIVERSAL TENSIONING GAUGE FOR CAM BELTS
- It can be used to adjust the tension on the cam belt where the movement of timing belt is measured by load(NM).
- • Suitable for use on various cam belt widths.
- • Easy to use.
- • Clear incremental marking with knurled knob for precise measurement.
- • Dual scale allows reading from top or bottom of tool.
RM345.00
- YIHU YH1500-III GASOLINE GENERATOR 230V/50Hz
- 1. Low fuel consumption;
- 2. Low noise;
- 3. Reliable;
- 4. AVR
- 1、Operating safety strengthen:Separating light current and high current system,strengthen operating safety and convenience; Add cable connection cover, water-proof, dust-proof and safer.
- 2、Longer life time:Design improvement of wind-guide cover of cylinder head, increasing wind flow to high temprature points, lower running temprature of fuel tank and alternator, more reliable; Stronger inner protector of muffler.
- 3、 Brief quick start guide stickers
RM810.00
- TOW ROPE WITH CLIP ON LOCK 5/8"X14' AM8220
- 5/8" x 14 Ft.
- PP braid extra super strength app. 6500 lbs.
- Heavy duty forged hooks with safety catch & plastic guard.
- Excellent stretch to absorb sudden shock..
- Super Strong Light Weight
RM17.00
- Light weight, portable and anti-corrosin - Stainless steel and PPO composite materials used make the pumps light-weight, portable and rust-free.
- Motor protection - Built-in thermo regulator stops the motor when it heats up.
- Twin mechanical seal - The pumps is enclosed in an oil-filled enclosure, protected by a twin mechanical seal, providing double-protection from the water.
RM480.00
- JTC-4291 26PCS FEELER GAUGE (DOUBLE BENDED)
- Length: 89mm (3.5 inch), width: 12.8mm.
- Metric size: 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305,
- 0.33, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508,
- 0.533, 0.559, 0.584, 0.61, 0.635, 0.66, 0.686, 0.711,
- 0.737, 0.762mm.
- Inch size: 0.005, 0.006, 0.007, 0.008, 0.009, 0.01, 0.011, 0.012,
- 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.02,
- 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.027, 0.028,
- 0.029, 0.03 in.
RM66.00
- JETECH A12-IM-15S 15 PCS IMPACT SCREWDRIVER SET
RM75.00
- JETECH DF-10A INSULATED HANDLE DIAMOND MINI FILE SET
- 0 - 8 degree tooth angle ensures sharp cutting and better eject of shaving. Clean surface materials before teething process ensure even and consistent teeth shape with consistent filling effects.
- Size: 3MM (D) x 140MM
RM73.00
- JETECH FHRT-300 HALF ROUND FILE C/W HANDLE (BASTARD)
- 0 - 8 degree tooth angle ensures sharp cutting and better eject of shaving. Clean surface materials before teething process ensure even and consistent teeth shape with consistent filling effects.
RM18.00
- JETECH SS-6 6PCS SOFTGRIP SCREWDRIVER SET
- Contains: ST4-75mm (+/-), ST5-100mm (+/-), ST6-150mm (+/-)
- Jetech shaft is made of chrome vanadium molybdenum alloy steel which makes high hardness, high tenacity and optimal high torsion
- Screwdriver tips with superior features: Jetech screwdriver blades, made of high quality chrome vanadium alloy steel, through precision machining process and consistent heat treatment, to make blade perfectly fit screw heads at use at achieve maximum torsion even higher than any country's product standard
- Shaft and back-end joined design: Jetech go through softgrip screwdriver is designed its hexagonal shaft go through handle and joint the rear end impact cap which allow hammer striking force go through to shaft head without damage
- The internal structure of screwdriver handle: Jetech screwdriver handle is made of modified Poloypropolene plastic inside and of Thermal Plastic Elastomer outer side to obtain the perfect comfortable hand gripping and high torsion simultaneously
RM42.00
RM60.00
- JETECH PE-S PRECISION SCREWDRIVER SET
- Contains: (-)1.0 (+)No.00, (-)1.2 (+)No.0, (-)1.6 (+)No.1
- Jetech shaft is made of chrome vanadium molybdenum alloy steel which makes high hardness, high tenacity and optimal high torsion
- Screwdriver tips with superior features: Jetech screwdriver blades, made of high quality chrome vanadium alloy steel, through precision machining process and consistent heat treatment, to make blade perfectly fit screw heads at use at achieve maximum torsion even higher than any country's product standard
- Shaft and back-end joined design: Jetech go through softgrip screwdriver is designed its hexagonal shaft go through handle and joint the rear end impact cap which allow hammer striking force go through to shaft head without damage
- The internal structure of screwdriver handle: Jetech screwdriver handle is made of modified Poloypropolene plastic inside and of Thermal Plastic Elastomer outer side to obtain the perfect comfortable hand gripping and high torsion simultaneously
RM12.25
RM17.50
- JTC4845 ENGINE TIMING TOOL SET - CITROEN & PEUGEOT
- • This comprehensive set of tools enables the correct engine timing
- to be made when replacing the timing belt. Suitable for use on the
- most recent car with either HPI (petrol) or HDI (diesel) engines.
- • Applicable : Citroen and Peugeot Twin Cam 16V Petrol engine codes
- (EW7J4, EW10J4, EW10J4S, EW10D-HPi, EW12J4).
- • Citroen : Xsara / Picasso C4, C5 , Evasion / Synergie , C8 , Jumpy / Dispatch
- • Peugeot : 206, 307, 406/Coupe, 607, 806, 807, Expert.
- • Upgraded from JTC-4675 for more widely use.
RM430.00
TIGER K-800 WHOLLY HEAT TREATED CARBON STEEL CONCAVE BLADE PRUNING SHEARS WITH RUBBER GRIP HANDLE 8"
- TIGER K-800 WHOLLY HEAT TREATED CARBON STEEL CONCAVE BLADE PRUNING SHEARS WITH RUBBER GRIP HANDLE 8"
- Designed ideally for pruning both live and dead wood, hard branches of plants and others, which comes with comfortable rubber grip handle. The shape design of Parrot-beak consist of two concave blades made of wholly heat treated carbon steel. This helps to trap the stem in between the blades before the making of the cuts. It is suitable only for narrower stems. With proper care this tool will provide years of satisfied use.
- Caution
- DO NOT attempt to cut oversized material (the branch diameter should fit into the lower half of the open blades)
- Always keep the blades clean after use and lubricates them if possible
RM14.50