- Lifting Support Belt / Back Support
- Helps to reduce lower back discomfort & repetitive back strain
- Velcro closure for easy open & close
* This padlock range offers general security for outdoor conditions.
* They can be applied to gates, garages, shutters and shed doors.
* These padlocks' unique satin chrome plated finish and Boron shackle increases resistance to attack.
* Double locking shackle.
* Self-latching mechanism.
- Polyamide Lanyard
- Rope size is 12mm dia
- 1.6M-LH - 1.6M
- 2.0M-LH - 2M
- Conform to BS EN 354 & Sirim certification No : PPO71005
- Polyamide Lanyard
- Rope size is 12mm dia
- 1.6M - SH - 1.6M
- 2.0M - SH - 2M
- Conform to BS EN 354 & Sirim certification No : PPO71005
- Drop-forged, heat treated steel jaw
- Hardened and tempered, precision machined center bolt
- Sliding T – bar handle applies even force
- Black oxide finished for durability
- 3 jaw design for greater leverage and easy pulling
- Removes all sleeve type bearing with 1/2” – 2” inside diameter
Capacity 10L | |
Overall Depth 195 | |
Overall Length 319 | |
Overall Weight 0.82 | |
Overall Width 329 | |
Weight Each 900g |
CODE |
BLADE (M / FT) x (MM) |
W (MM) |
H (MM) |
D (MM) |
|
|
64- AA100 |
100 / 330 |
13 |
330 |
410 |
25 |
- Heat treatment and drop forged
- For removal replacement of oil drain plugs
- Professional Caulking Gun
- Totally enclosed aluminium cylinder
- Ratchet action handle
- Hardened steel rod
- Uses standard 310ml cartridges.
- 32 Teeth
- Chrome vanadium steel
- Black phosphate finished
- Proper heat treated
- Ratcheting box end
- Two sides different socket size
- Reversible precision blades ensure perfect fit every time
- Plastic box with black EVA holds each item firmly
- With fast turning swivel cap for easy operation
- Made of quality aluminium materials
- 2 STAGE WATER FILTER SET WATER FILTRATION DOUBLE WATER FILTER CARBON
- Double Water Filter
- Applicable On PP Sediment Filter and CTO Carbon Block Filter
- 1st Stage: 10" PP Sediment Filter
- The 1st Stage is 1 or 5 Micron Sediment Filter that eliminates all particles greater than 1 or 5 micron in size including suspended solids
- 2nd Stage: 10" CTO Carbon Block Filter
- The 2nd Stage is carbon block filter for the removal of chlorine, taste, odor and other chemicals contaminants
- Nylon fiber body
- Working pressure : 75-120PSI/ 5.0-8.0KGS
- Max pressure : 220PSI/ 15KGS
- Application:
- To blast debris and dirty out of confined spaces
1) Medium: oxygen, nitrogen, air
2) Inlet pressure: 15MPa
3) Adjusting range: 0.02-1.25MPa
4) Flowrate: 40m3/h
5) Inlet thread: G5/8
6) Outlet thread: M16X1.5
- Hardened-steel punch forces pin all the way out
- Design for motorcycle and bicycle
- Easy operate
- Ideal for disassembling rivet type roller chain
- To repair your motorcycle/bicycle chains with strength & ease
- multi-position ratchet bar provides strength and durability.
- steel plated base adds stability and reduces sinking into pavement.
- Chrome plated steel screw with swivel pad
- Heat treated steel bar
- Hardwood screw handle
- Use for a firm hold on your metal fabricating or woodworking projects
- 38-PH443 5/16"X20M HIGH PRESSURE AIR HOSE With Brass Fitting
- Absorb the advance technology from japan, green environment material with high density of polyester yarn
- Highly flexible and durability against climate, abrasion and chemical
- High pressure (250 Bar)
- Used to concentrate water at one point or spread it over a large area
- 38-PH444 5/16"X30M HIGH PRESSURE AIR HOSE With Brass Fitting
- Absorb the advance technology from japan, green environment material with high density of polyester yarn
- Highly flexible and durability against climate, abrasion and chemical
- High pressure (250 Bar)
- Used to concentrate water at one point or spread it over a large area
- 3M 3744 Particulate Filter with carbon layer is for use with the 3M 3000 series respirator and the 3M 3700 filter retainer.
- Comes packed in a box of 10 pcs / box.
- 3M 5N11 N95 Pre - Filter for Low Maintenance Respirators Series is the workhorse of the filter series.
- Used with the 3M 501 Filter Retainer to be clasped against the wide range of cartridges, this cost-effective filter meets the vigorous demands of a lot of industries.
- Packed and priced 10 pcs / box.
- 3M 6004 Ammonia Methylamine Cartridges (2 pcs / pkt) is made for the 6000 and 7000 series respirator that utilizes double cartridges.
- Sealed in aluminum foil packing, this durable cartridge is made to absorb Ammonia Methylamine gas.
- 3M 6006 Multi Gas / Vapor Cartridges (2 pcs / pkt) is made for the 6000 and 7000 series respirator that utilizes double cartridges.
- Sealed in aluminum foil packing, this durable cartridge is made to absorb a wide spectrum of gases and vapors.
- 3M 6009 Mercury/Chlorine Vapor Cartridges (2 pcs / pkt) is made for the 6000 and 7000 series respirator that utilizes double cartridges.
- Sealed in aluminum foil packing, this durable cartridge is made to absorb Mercury / Chlorine vapor.
- It is also the only cartridge to have an indicator when it is time to change the cartridge.
- 3M 6200 Double Half Face Respirator is a half face double respirator that accommodates 2 pieces of cartridges / filters.
- The 6200 is a size MEDIUM.
- 3M 6200 Double Half Face Respirator is a half face double respirator that accommodates 2 pieces of cartridges / filters.
- The 6200 is a size LARGE.
- 3M 7701K Silicone Single Respirator.
- Size: Small
- 3M 7702K Silicone Single Respirator.
- Size: Medium
- 3M 7703K Silicone Single Respirator.
- Size: Large
- 3M Peltor Optime 95 H6A/V Beige Earmuff. Stainless steel construction resists bending and warping.
- Earcup pivot points tilt for optimum comfort and efficiency.
- Noise Reduction Rating (NRR)*: 21dB. CSA Class B
- 3M Peltor Optime 98 H9A Over-The-Head Yellow Earmuff.
- For noise levels up to 95 dBA. Earcup pivot points tilt for optimum comfort and efficiency.
- Noise Reduction Rating (NRR)*: 26 dB CSA Class A
- Flux-resistant copper bit ensures long soldering life
- Lightweight comfortable wooden handle
- Voltage 220v
- For home workshop, repairs, hobbies & stained glass applications
- Takes roller chain apart easily without hammers and punches
- Heats-treated tip, screw and nut
- Replacement screw and nut, tip and handle available
- Ideal for disassembling rivet type roller chain
- To repair your motorcycle/bicycle chains with strength & ease
Circular cutter capacity | 40 – 200mm | |
Hex key | 25mm x 65mm | |
Tungsten carbide tipped cutter | 7mm x 50mm(L) | |
Tungsten tipped pilot drill bit | 8mm x 80mm(L) | |
Center drill bit | 6mm x 55mm(L) | |
Set (Ctn) | 30 |
- * This padlock range offers general security for outdoor conditions.
- * They can be applied to gates, garages, shutters and shed doors.
- * These padlocks' unique satin chrome plated finish and Boron shackle increases resistance to attack.
- * Double locking shackle.
- * Self-latching mechanism.
- Aluminium body
- 3 tubular vials:
- 1 x top read level vial
- 1 x plumb vial
- 1 x 180° rotating angle vial (double graduation for 0° up to 90° and in 10° increments)
- Shock absorbing end caps
- Accuracy of +/- 1.5mm/m
- This padlock range offers general security for outdoor conditions.
- They can be applied to gates, garages, shutters and shed doors.
- These padlocks' unique satin chrome plated finish and Boron shackle increases resistance to attack.
- Double locking shackle.
- Self-latching mechanism.
CODE |
SIZE (LBS) |
D (MM) |
H (MM) |
L (MM) |
|
66- CP110 |
1 |
30 |
70 |
280 |
|
66- CP115 |
1-1/2 |
34.5 |
70 |
305 |
|
66- CP120 |
2 |
40 |
74 |
350 |
|
66- CP130 |
3 |
45 |
90.5 |
375 |
|
66- CP140 |
4 |
50 |
95 |
385 |
|
66- CP160 |
6 |
50 |
140 |
790 |
|
66- CP180 |
8 |
65 |
115 |
805 |
|
66- CP200 |
10 |
61 |
145 |
900 |
|
66- CP216 |
16 |
80 |
145 |
920 |
|
66- CP220 |
20 |
90 |
145 |
940 |
|
- Circlip pliers with quick change internal/external switch mechanism. Manufactured from Chrome Vanadium steel. Supplied with one set of double end straight tips
- (1.2 and 1.8mm) and two sets of 90° tips (1.2 and 1.8mm). Tips held securely in holders with grub screw. Comfort grip vinyl dipped handles with storage for spare tips and hex key for quick and easy selection
- 1.5 TON SCISSORS JACK
- Heavy duty steel construction
- Smooth operation with faster up & down operation
- Include with one handle
- For safely lift up your automobile when need to work underneath
- Aluminium body
- 3 tubular vials:
- 1 x top read level vial
- 1 x plumb vial
- 1 x 180° rotating angle vial (double graduation for 0° up to 90° and in 10° increments)
- Shock absorbing end caps
- Accuracy of +/- 1.5mm/m
- 95-AG309 15" TIRE GAUGE
- Working pressure : 160 Ib/in²
- Tough break-resistant A.B.S plastic head
- A long body and dual head allow the tire gauge to reach inside or outside
- Designed to measure air pressure on tires
CAPACITY (ℓ) |
W (MM) |
H (MM) |
L (MM) |
|
|
95- HS430 |
3.0 |
170 |
375 |
|
|
95- HS450 |
5.0 |
195 |
425 |
|
|
95- HS480 |
8.0 |
210 |
515 |
|
|
CAPACITY (ℓ) |
W (MM) |
H (MM) |
L (MM) |
|
|
95- HS430 |
3.0 |
170 |
375 |
|
|
95- HS450 |
5.0 |
195 |
425 |
|
|
95- HS480 |
8.0 |
210 |
515 |
|
|
1" 1"DR. STANDARD LENGTH IMPACT SOCKETS-12PT
Size : 1"
D2 : 54mm
D1 : 32mm
L2 : 11mm
L : 60mm
Size : 1"
Shape : A
D2 : 51mm
D1 : 42mm
L2 : 17mm
L : 58mm
Size : 3/4"Female x 1"Male
D2 : 44mm
L : 63mm
- Commodity serial number: HRP3225
- Type: Manual-like
- Oil pumping distance: 1.5M
- Presses the oil distance: 6M
- Available liquid: Lamp oil, light oil, A heavy oil
- Puts out ability (L/min): 28
- Rotation number: Approximately 70 chapter of/minutes
- Weight (kg): 1.3
- Span (m): 1.3
- Modern design & comfort
- Adjustable nozzle from a direct jet to finest mist
- Convenient & save energy
- Power supply : 2 x 1.5V AA Battery
- Flux-resistant copper bit ensures long soldering life
- Lightweight comfortable wooden handle
- Voltage 220v
- For home workshop, repairs, hobbies & stained glass applications
- BOSCH 2607019325 33-Piece X-Line Drill and Screwdriver Bit Set
- Robust, compact and easy to handle: with the Bosch accessory set in the handy carrying case, you've got a handle on everything. The X-Line series from Bosch offers a first-class basic set of top-quality accessories: clearly laid out and always ready for use.
- CTC Double Water Filter
- Applicable on ceramic filter AND CTO carbon block filter
- 1st Stage: Ceramic Filter
- 0.3 & 0.9 micron filtration. consist of highly compressed ceramic diatom. Stop the propagation of bacteria, germs and viruses. Filtert for dirt, solids and dangerous bacteria such as typhoid, cholera, bilharzia & amoebas
- 2nd Stage: 10" CTO Carbon Block Filter
- Remove chlorine, THMs, organic chemicals and unpleasant odors and color. The end result is pure, crystal clear mineral water
- Hardened-steel and easy operate
- Handle can be folded away for easy storage
- Ideal for disassembling rivet type roller chain
- To repair your motorcycle/bicycle chains with strength & ease
- This chain breaker is ideal and essential tool for use on 420, 428, 520 & 530 chain