- 18V XR Li-Ion compact drill driver featuring XR 1.3Ah Li-Ion battery technology.
- 13 mm single sleeve chuck and spindle lock for quick and easy bit change with one hand.
- Two speed settings, variable speed and reverse switch for maximum control.
- Intelligent trigger design allows for total control of application.
- 16 Position adjustable torque control for consistent screw driving into a variety of materials with different screw sizes.
- Drill Driver and Hammer settings for multiple applications.
- Bright white LED with delay feature for improved visibility and flashlight functionality.
- Improved ergonomic design and rubber grip increases user comfort.
- Multi-voltage charger for all XR Li-Ion slide pack batteries.
- Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster.
• No pick up when generator is killed.
• Prevent form Audio lock up or Computer down when changing the car battery.
• Power supplier for home electric appliances.
• Emergency power supply.
• Easy and quick charge.
• Size:320 x 85 x 240mm
• Weight:9kgs
Model X5ET0.5EE
**Features**
.Design for removal, installation and transportation of transmission and transfer cases on passenger cars, vans and light trucks that are raised by an in ground lift
.Supplied with chain for safe loading
.Precision valve allows delicate adjustment when taking out gearbox and realigning during replacement
.Four castors for extra manoeuvrability in confined spaces
.Low frame design gets under the lowest clearance trucks, making it ideal for clutches repair work
**Specifications**
Model X5ET0.5EE
Lifting weight 0.5 ton
Min. height 170 mm
Max. height 680 mm
Net weight 45 kg
Packing 86 x 44 x 22 cm
Warranty 6 months
- Power:750W/240V
- Speed: 2950rpm/50Hz
- Wheel Size:250x25x32mm
- 100% Copper
- Permanently Lubricated Motor Bearings for Long Life
- Adjustable Eye Shield and Spark Guards
- Removable Wheel Guards For Easy Wheel Changing
- Adjustable Tool Rests
- Model EP1200
- Frequency 50Hz
- Power Factor 1.0
- Rated AC Output 900W
- Max. AC Output 1000W
- AC Output Voltage 240V
- Noise Level LwA 89dB(A)
- Engine Type 4-Stroke, air cooled, single cylinder
- Displacement 98cc
- Continuous Operating Time (50% - 7 hour) (100% - 4 hour)
- Starting System Recoil
- Net Weight 21.5kg
- Gross Weight 24kg
- Dimension L435 x W315 x H365mm
- Warranty 6 months
- 12V ultra-compact multifunction emergency portable starter for motorcycles, automobiles, campers, marine engines etc.
- Fit with two USB outputs (1A-2,1A) to charge (power bank) electronic devices (tablets, smartphones, MP3 players, notebooks, cameras etc.), two 12/19V outputs to power laptops and other devices and two high intensity emergency LED lights.
- It uses high-efficiency lithium LiPo polymer cells that provide rapid and complete charging, constantly monitored by a series of LEDs.
- Protection against polarity reversal.
- Complete with starting cables, various connectors for mobile devices, cigarette lighter plug and wall charge.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
Set contains:
8,9,10,11,12,13,14,15,16,17,18,19mm
Plus a 1/4", 3/8" & 1/2" Socket adapter
Metal storage case
- High Quality Japanese Components
- 740mm x 480mm Deck with 850mm Heigh Folding Handle
- Platform Height: 140mm
- Fitted with 2 Fixed and 2 Swivel 100mm Diameter Castors
- High Push Handle
- High Quality Precision Bearing Castors Provide Smooth Rolling Action
- Non-slip Matting and Plastic Bumper Around Deck
- Maximum Load Capacity: 150Kg
- Weight: 12.5kg
- 15M/50FT AIR HOSE REEL C/W STANDARD ACCESSORIES
- Technical Specification:-
- -Hose Length : 15meter (50ft)
- -Inner Diameter Of Air Hose : 3/8” (9.5mm)
- -Pressure : Max 1.7Mpa (250psi)
- -Size Of Inlet Fitting : 1/4 npt
- Rated Input Voltage (V) : AC240V
- Power Frequency : 50/60
- Phase : 1
- Rated Input Current (A) : 22
- Rated Input Power (KVA) : 4.9
- No-load Voltage (V) : 65
- Welding Current (A) : 10 - 160
- Welding Voltage (V) : 20.4 ~ 26.4
- Rated Duty Cycle (%) : 60%
- Insulation Grade : F
- Cover Protection Level : IP21S
- Type of Cooling : Air Cooling
- Packaging Size (mm) : 320 x 120 x 200
- Weight (kg) : 4.3 KG
- Drilling Cap. (mm): 16(5/8")
- Motor Power: 550W
- Spindle Travel (mm): 85
- Spindle Taper: MT#2
- Class Of Speed:16
- Swing:(mm): 325
- Table Size (mm): 290x290
- Base Table(mm): 420x20
- Column Dia. (mm): 70-72
- Height(mm):980
- WITH GUARD,EMERGENCY SWITCH & LASER
- 16mm 550W Bench Drilling Machine HELI HL-4116B
- Drilling Cap.: 16mm
- Motor Power: 550W
- Spindle Travel: 65mm
- Class Of Speed: 12
- Spindle Taper: M#2
- Swing: 310mm
- Table Size: Ø260mm
- Base Size: 420x250mm
- Column Dia.:Ø58
- Height:900/950mm
- 16mm 750W Bench Drilling Machine HELI HL-4116
- Drilling Cap.: 16mm
- Motor Power: 750W
- Spindle Travel: 85mm
- Class Of Speed: 16
- Spindle Taper: M#2
- Swing: 325mm
- Table Size: Ø290mm
- Base Size: 420x250mm
- Column Dia.:Ø72
- Height:980mm
- Quick release & best suited for limited access areas
- Uniform load distribution and self-centered
- Through reversing the arms internal & external application are possible
- Supplied with different leg variants and hydraulic thrust spindle
- Extremely robust spindle with inductively hardened thread
- To draw out pullers, bush and bearings
- Polished ram plunger and cylinder protecting seals from abrasion
- Built-in safety valve ensuring operation safety against overloading
- Patented hydraulic bypass system preventing ram plunger from over-travelling
- Net Weight (kg)25
- Gross Weight (kg)28
- Package Size (mm)790 x 550 x 320
- * Tank capacity : 20 Gallon
- * 50 GPH Pump
- * Removable work shelf and parts basket
- * Durable steel cabinet with powder coal finish
- * Power supply : 240/50Hz ( Solvent Pump )
- * Net weight : 25kg
- * Solvent Capacity : 12 Gallon.
- * Max pump output through spigot:Recirculate 2.7-3.3liter/min of
- solvent
- * Package size : 78 × 55 × 31 cm
- Brand : X5
- Model:TRPW20GAL
- Gross Weight / Net Weight (kg): 28 / 25
- Package Size (mm) : 790 x 550 x 320
- 12-gallon working capacity & 50 GPH pump output
- Removable work shelf and parts basket & accepts many commonly used cleaning agents
- For use with petroleum or water based solvent & suitable for different kind of solvent at same time
- Self draining. Convenient removable work shelf. Parts basket for soaking small parts in solvent
- Fusible link greatly reduces risk of fire hazards
- 110 volt solvent pump. Complete Unit is UL approved. Magnetic pump
- Specifications: Tank Capacity: 20 gallon. Solvent Capacity: 12 gallon, Pump Output thru Spigot: 50gph
200MM/8" BENCH VISE Double Ribbed with large Anvil & Malleable cast nut
- Adjustable leverage adapts pump to lubricant and operating conditions.
- Designed for both high volume transfer and dispensing a variety of low viscosity fluids
- Equipped with air connector and quick detach coupler
- - Soft start to limit start up current and reduce kick back
- - Fitted with anti vibration side handle, quick adjustment tool free guard.
- - Abrasion protected high power motor for increased motor durability, with fully leaded starter windings for increased motor durability.
- - Five positions on side handle for improved balance in cutting and grinding applications.
- - Cut off brushes to prolong motor life, and dust sealed bearings for prolonged product life
- - With spindle lock
- Battery: Li-polymer
- Recharge power input: +15V DC/1A
- Power supply outputs: 5V/12V/19V/24V-2.1A/3.5A/400A
- Capacity:23.1Ah
- Size: 190*150*90mm
- Weight: 1kg
- Full charge time: 5 hours
- Starting current: 400A
- Peak current: 800A
- Working temperatures: -40 - 85°C
- Cycle lifespan: 3,000+ times of recharge
- Features: LCD screen, 24V professional for trucks & diesel, high rate jump start
- 250MM/10" BENCH VISE Double Ribbed with large Anvil & Malleable cast nut
- - SHOCKS® - Active Vibration Control reduces vibration felt by the user at the handles. A Perform and Protect feature.
- - 8 amp motor provides high performance and overload protection: 0-1,150 RPM, 0-4,300 BPM
- - Variable speed trigger allows user to instantly control speed from 0 to dialed setting
- - Delivers 2.8 joules of Impact Energy, providing fast drilling and powerful chipping
- - Mode selector allows for usage in rotary hammer, rotary only, and chiseling applications
- - Reversing feature helps release tool from bind up situations and assists with removal of fasteners
- - Integral clutch reduces sudden, high torque reactions if bit jams
- - 360-degree side handle adjusts easily for preference or use in tight spaces
- Easily Converts
- Ergonomiv
- Strong
- Easy to move
- Easy to use (Quick one-hand conversion, no pins or tools)
- Versatile
- Lightweight
- 300MM/ 12" BENCH VISE Double Ribbed with large Anvil & Malleable cast nut
Inner D: 32mm / 1-1/4"
Outer D: 32mm
Length: 50M
- Aearo Reusable Earplugs
- Corded Each pair comes with a cord & is supplied with a polybag
- NRR : 25db
- Comply JKKP EP 35
- (100prs / Box)
- 3M 1270 Reusable Corded Earplugs are washable, reusable earplugs that have a triple - flange system designed to securely fit your ear canal as best as possible, when worn correctly. Packed in a box of 100 prs / box.
- 3M 6700 Double Full Face Respirator is a full face respirator which is able to accommodate 2 pieces of cartridges and / or filters.
- The 6700 model is a size SMALL respirator.
- 3M 6800 Double Full Face Respirator is a full face respirator which is able to accommodate 2 pieces of cartridges and / or filters.
- The 6800 model is a size MEDIUM respirator.
- 3M 6900 Double Full Face Respirator is a full face respirator which is able to accommodate 2 pieces of cartridges and / or filters.
- The 6900 model is a size LARGE respirator.
- Tank capacity : 40 Gallon
- Power supply : 240/50Hz
- ( Solvent Pump ) Net weight : 42kg
- This multi-purpose vise has two sets of jaws to clamp fast on pipes or square stock.
- The jaw head swivels 360º for precise positioning and the 5 in. wide jaws have a diamond pattern for a firm grip on your workpiece.
- With a swivel base this multi-purpose metalworking vise can be rotated for easy access to the anvil.
- 5 in. wide jaw with diamond pattern face
- 50kg
- Top working surface area: 320mmX125mm
- Whole dimension: 515mmLx200mmWx235mmH
Inner D: 50mm / 2"
Outer D: 60mm
Length: 40M
- Voltage 220V 50Hz
- Power 550W (0.75HP)
- Current 2.6A
- Rated pressure 0.7Mpa (7Bar)
- Speed 1400r/min
- Tank capacity 30Liter
- Air capacity 75L/min (2.6CFM)
- Noise 69dB(A)
- Insulation Class B
- Weight 21kg
- Dimension 585 x 280 x 245mm
- Voltage 220V 50Hz
- Power 550W (0.75HP)
- Current 2.6A
- Rated pressure 0.7Mpa (7Bar)
- Speed 1400r/min
- Tank capacity 60Liter
- Air capacity 75L/min (2.6CFM)
- Noise 69dB(A)
- Insulation Class B
- Weight 35kg
- Dimension 650 x 305 x 637mm
- This multi-purpose vise has two sets of jaws to clamp fast on pipes or square stock.
- The jaw head swivels 360º for precise positioning and the 5 in. wide jaws have a diamond pattern for a firm grip on your workpiece.
- With a swivel base this multi-purpose metalworking vise can be rotated for easy access to the anvil.
- 6 in. wide jaw with diamond pattern face
TRAY 1 (21 PCS)
- 10-1/2 DR.SOCKET 8,10,12,13,14,15,16,17,18,19MM
- 5-DEEP SOCKETS 8,10,12,13,14MM
- 1-UNIVERSAL JOINT
- 2-EXTENSION BAR 75Mm,150MM
- 1-COUPLER 1/2"(F) X 1/4"(H)
- 1-LEVER TYPE RATCHET HANDLE W/48 TEETH GEAR
- 1-FLEXIBLE HANDLE
TRAY 2 (34 PCS)
- 1-SPIN RATCHET 72 TEETH
- 1-BIT ADAPTOR 1/4" X 25MM
- 19-25MM BITS (+) 1,2,3 (-) 4.5,6.5,8 (H) 3,4,5,6,7,8 (T) 10,15,20,25,27,30,40 W/TAMPER PROOF
- 9-COMBINATION WRENCHES 8,10,12,13,14,17,18,19,22MM
- 4-ALLEN KEY 4,5,6,8MM
TRAY 3 (7 PCS)
- 1-LOCKING PLIERS
- 1-LONG NOSE PLIERS 160MM
- 1-DIAGONAL PLIERS 160MM
- 1-COMBINATION PLIERS 180MM
- 1-BIT HOLDER DRIVER HANDLE
- 2-SCREWDRIVERS PH22x150MM, SL6.5x100MM
- 1-METAL CANTILEVEL BOX
.Replaceable hardened steel jaws.
.Fused steel handle bends before vise can be over stressed.
.Machined steel main screw with rolled two-start acme thread for wear-resistance and smooth operation.
.Fully-machined on all load-bearing surfaces.
.Internal SG nut takes load, secures and aligns main screw. Can be replaced when worn, saving
cost of replacement of whole vise body.
.Safety stop prevents slide from accidentally separating from body.
.Lip on back body guides filings and fragments away from the slide.
- Motor power 850W
- 3-Speed selector High /Medium /Low
- Beautiful, appearance with the advantages of lightness and high flexibility
- Safety cover for motor can prevent sucking any sundries
- Super fan-turbo-motor can produce strong airflow to improve the work efficiency
- Polythene outer shell can protect the inner components and make the machine safe and durable
- High grade material and three-speed selector ,which can make you regulate the airflow optionally
- Strong airflow and little noise make it suitable for hotels, large workshops, warehouses, marketplaces and other wet places
Mains connection: 230V ~ 50Hz
Motor rating: 90kW
Intake capacity: 19 l/min
Output Power: at 1 bar :11 l/min.
at 2 bar :9 l/min.
at 3 bar :6 l/min.
Operating pressure: Max.4 bar
No. of cylinders: 1
- Portable with 2 wheels.
- Air regulator with dual gauges.
- Automatic pressure switch.
- Thermal protection switch.
- Air safety release valve.
- ALUMINIUM WORKING PLATFORM LADDER (WPL)
- Designed For Work comfortably along walls and windows. Ideal for painting
- Available for 2, 3 and 4 steps
- Large platform provides a non-skid area for standing
- Platform legs lock securely in place when in used
- Foldable and easy storage
- Rubber shoes provide slip-resistance and protect floor from damage
- Only 66mm (2-5/8") in head height.
- DA3010F : Features a built-in LED job light.
- With keyed chuck.
Continuous Rating Input 2000 w
Capacity Depressed Center Wheel : 230mm (9")
Wire Cup Brush : 110mm (4-3/8")
Cut-off Wheel : 230mm (9")
No Load Speed 6600 rpm
Dimensions (L x W x H) 432mm x 250mm x 132mm
Net Weight 4.7kg
Power Supply Cord 2.5m
- Increased heat resistance.
- Superior anti-dust structure.
- Machined bevel gear for strength.
- Soft grip for more comfort and control.
- Gear housing can be positioned at every 90 degrees.
- Use your air compressor and this oil drain to easily transfer the used oil from the built-in tank to your own secondary container for effortless recycling at any height. Height adjusts for draining fluids from vehicles on lifts. Standard shop air pressure is sufficient to quickly empty used fluids from the storage tank.
12inch Portable Axial Blower (13.8kg)
Size: 12"
V: 220-240
Phase single
Hz50/60
W520
r/min: 2800/3300
m3/min:65
dB(A)71
(Pa)373
c/w 5 Meter Dust Hose (Weight: 4.7kg)
- Sample flue gas with your Fluke CO-210 or CO-220 using the CO-205 Aspirator Kit
- Draw flue gas samples up to 700ºF (370ºC) reliably for measurement with the Fluke CO-210 Carbon Monoxide probe or Fluke CO-220 Carbon Monoxide meter.
- The CO-205 aspirator accessory kit contains all the components necessary to provide a clean sample for the Fluke family of gas measuring devices.
Features
- Protected against overloading and reverse polarity
- Selector switch for normal charge or fast charge (boost)
- These chargers are equipped with a quick start function
- Shows the charging and starting current
- For a maximum starting current, the battery can first be charged for 5-10 minutes with fast charge (boost). The unit is then switched back to "start" in order to start the vehicle.
Technical Information
- Single-phase, portable battery chargers for charging lead accumulators
- With toggle switch for normal and fast charge (boost), quick start
- Equipped with protection against overloading and reverse polarity
- With ampere meter for charging and starting current
- Multiple charge current settings
- Mains voltage 230 V
Applications
- For charging 12 V batteries
- Protected against overloading and reverse polarity
- Selector switch for normal charge or fast charge (boost)
- These chargers are equipped with a quick start function
- Shows the charging and starting current
- For a maximum starting current, the battery can first be charged for 5-10 minutes with fast charge (boost).
- The unit is then switched back to "start" in order to start the vehicle.
- SUMO-KING battery chargers are specially designed to cater for charging multiple units of battery each time [up to 8 pcs of 12V Batteries or 16 pcs Batteries] connected in series connection. This is made possible with us of flexible multiple voltage and current selection's Dial to provide various combinations of charging conditions to suit individual requirement.
- Every unit's casing are made of heavy gauge steel plate complete with epoxy powder coated paint finishing to enhance lifespan for rough usage environment. The battery Charger comes with two different designs, either with Fixed or Multiple Voltage / Current selections.
- Electronic speed control
- Easy and quick sanding belt change
- Exact belt position with precision adjustment
- Adjustable additional handle for optimum work
- Chip extractor adapter and dust collection box
- Hinged front cover
- Soft grip
- Cable clip
- 1 sanding belt
- 9 speed settings from 280 – 2,350 min-1
- V-belt drive, speed setting with stepped belt pulley
- Drilling spindle with ball bearings
- Scroll chuck
- Folding chip guard
- Swiveling scale ring for precise drilling depths
- Drill table can be tilted and swiveled
- Infinitely variable adjustment of table height
- Stable foot with slots for vise fastening
- ON/OFF switch with zero-voltage release